Advertisement
Quick Links
Advertisement
Related Manuals for Tuft & Needle Wood Frame
Summary of Contents for Tuft & Needle Wood Frame
- Page 1 Wood Frame A S S E M B LY I N S T RU C T I O N S...
-
Page 2: Care Instructions
CARE INS T RU C T IONS Your bed frame does not require special waxing or oiling. For routine cleaning, follow the ► instructions on the care card. You may also dust at any time with a clean, dry, soft cloth. Moisture and heat can damage a wood finish. - Page 3 Parts Assembly Side Rail Headboard Center support beam Arrange all frame parts on the floor. We recommend placing them on a soft rug or carpet. Footboard Slat sets Hardware Washer Threaded Rod Screw Insert four threaded rods into headboard and footboard. Wrench Phillips-Head Screwdriver Hand-tighten all the way down until they can no longer turn.
- Page 4 Begin to thread each nut on the four threaded rods, but don’t thread them entirely down the rod. (This may sound counter- intuitive but it is necessary for a later step.) Insert the washer under the nut. Fully tighten with the flat wrench. Place siderails onto footboard by inserting pegs into the corresponding holes.
- Page 5 Place siderails onto headboard by inserting pegs in their corresponding holes. Using your screwdriver and two screws, screw center beam into matching holes on the cleat of the headboard. Then repeat on cleat of footboard. Insert the washer under the nut. Adjust leveling feet as needed.
- Page 6 Lay slats horizontally on bed frame, across the center beam, aligning slat screw holes with holes on side rail cleats. Using your screwdriver and remaining screws, secure each side of the slat onto the cleat on the inside of the side rail. Once all the slats are secured, you’re ready for your mattress.
- Page 7 Questions, Comments, Photos? We’d love to hear from you! Email frame@tn.com or call us at (877) 842-2586...
Need help?
Do you have a question about the Wood Frame and is the answer not in the manual?
Questions and answers