Page 1
Model Number: UPC Code: Color: 0-65857-17827-2 DL7891TBB Mocha Customer satisfaction is important to us at Dorel Asia. Our agents are available Monday to Friday 8am to 5pm (EST) to answer any question you may have. For faster service, always have the model number ready when calling our toll free number 1-800-295-1980 or emailing us at das@dorel.com .
Page 2
CUSTOMER SERVICE If you are missing parts or have any questions about this product, contact our customer service representative first! CALL 1-800-295-1980 You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the part. Customer Service Department No.
Page 3
NOTES READ EACH STEP CAREFULLY BEFORE STARTING. IT IS VERY IMPORTANT THAT EACH STEP OF INSTRUCTION IS PERFORMED IN THE CORRECT ORDER. IF THESE STEPS ARE NOT FOLLOWED IN SEQUENCE, ASSEMBLY DIFFICULTIES WILL OCCUR AND CAN RESULT IN INJURY. CAUTION: ADULT ASSEMBLY REQUIRED MAKE SURE ALL PARTS ARE INCLUDED.
Page 4
TRIPLE BUNK BED DL7891TBB HARDWARE LIST Φ 1/4" x 100mm Φ 6.5mm x 48mm JOINT CONNECTOR (4mm HEX HEAD) WOOD JOINT CONNECTOR (4mm HEX HEAD) 24 PCS 28 PCS Φ 6.5mm x 100mm Φ 4mm x 35mm WOOD JOINT CONNECTOR (4mm HEX HEAD)
Page 5
TRIPLE BUNK BED DL7891TBB PARTS LIST TOP POST TOP POST TOP POST 1 PC 2 PCS 1 PC BOTTOM POST BOTTOM POST HEADBOARD TOP CROSS 2 PCS 2 PCS 6 PCS NOTE- the components needed to assemble the triple bunk bed are packed in 2 boxes.
Page 6
TRIPLE BUNK BED DL7891TBB PARTS LIST HEADBOARD BOTTOM CROSS TOP FRONT SIDE RAIL BOTTOM FRONT SIDE RAIL 6 PCS 1 PC 1 PC BACK SIDE RAIL BOTTOM BACK SIDE RAIL SLAT WITHOUT WOOD DOWEL 2 PCS 1 PC 18 PCS...
Page 7
TRIPLE BUNK BED DL7891TBB PARTS LIST RIGHT GUARDRAIL POST CENTER POST CENTER POST 1 PC 1 PC 1 PC CENTER POST CENTER POST FRONT SIDE RAIL 1 PC 1 PC 1 PC SHORT GUARDRAIL LONG LADDER LEFT END LONG LADDER RIGHT END...
Page 8
TRIPLE BUNK BED DL7891TBB STEP 1 Insert wood dowels (7) into the ends of headboard top cross (F), headboard bottom cross (G) and headboard center cross (S). Attach them to top posts (A & B) using wood joint connectors (3) as shown. Tighten the wood joint connectors (3) with the Allen key (8).
Page 9
TRIPLE BUNK BED DL7891TBB STEP 2 Insert wood dowels (7) into the ends of headboard top cross (F), headboard bottom cross (G) and headboard center cross (S) and attach them to bottom posts (D) & (E) using wood joint connectors (3) as shown. Tighten the wood joint connectors (3) with...
Page 10
TRIPLE BUNK BED DL7891TBB STEP 3 Attach the two headboards with bottom posts (D & E) to bottom front side rail (I) and bottom back side rail (K) using joint connectors (1) and barrel nuts (9) as shown. Tighten the joint connectors (1) with the Allen key (8).
Page 11
TRIPLE BUNK BED DL7891TBB STEP 4 Insert wood dowels (7) into each end of the long guardrails (M). Attach two long guardrails (M) and two top side rails (H & J) to top posts (A & B) and (C & B) as shown.
Page 12
TRIPLE BUNK BED DL7891TBB STEP 5 Insert wood dowels (7) into short guardrails (N). Attach short guardrails (N) to guardrail post (U) with wood joint connectors (3) as shown. Fasten the short guardrails (N) to top post (B) with wood joint connectors (3). Fasten the guardrail post (U) to top front side rail (H) with joint connectors (10) and hex cap (11) as shown.
Page 13
TRIPLE BUNK BED DL7891TBB STEP 6 Attach the guardrail leg (R) to the short guardrails (N) and top front side rail (H) with flat head screws (6). Attach the other guardrail leg (R) (on the other side of the bed) to long guardrails (M) and top back side rail (J) with flat head screws (6) as shown.
Page 14
TRIPLE BUNK BED DL7891TBB STEP 7 Insert wood dowels (7) into the end of the ladder steps (Q). Attach left ladder end (O) and right ladder end (P) to ladder steps (Q) with wood joint connectors (2). Tighten the wood joint connectors (2) with the Allen key (8).
Page 15
TRIPLE BUNK BED DL7891TBB STEP 8 Insert wood dowels (7) into the ends of headboard top cross (F), headboard bottom cross (G) and headboard center cross (S). Attach the center posts (W & X) using wood joint connectors (3) and Allen key (8).
Page 16
TRIPLE BUNK BED DL7891TBB STEP 9 Insert wood dowels (7) into each end of the long guardrails (M). Attach two long guardrails (M) and side rails (A1 and J) to center posts (W & X) and (Y & Z) as shown.
Page 17
TRIPLE BUNK BED DL7891TBB STEP 10 Insert wood dowel (7) into short guardrails (B1). Attach short guardrails (B1) to guardrail post(U) and right guardrail post (V) with wood joint connectors (3) as shown. Fasten the guardrail post (U) and right guardrail post (V) to center front side rail (A1)
Page 18
TRIPLE BUNK BED DL7891TBB STEP 11 Attach the guardrail leg (R) to long guardrails (M) and side rail (J) with flat head screws (6) as shown. Use a Phillips head screwdriver (not included) to tighten the flat head screws.
Page 19
TRIPLE BUNK BED DL7891TBB STEP 12 To assemble the ladder, insert wood dowels (7) into the end of the ladder steps (Q). Attach the long ladder ends (C1 & D1) to ladder steps (Q) with wood joint connectors (2) and Allen key (8).
Page 20
TRIPLE BUNK BED DL7891TBB STEP 13 Place four metal dowels (5) into the holes in the bottom posts (D and E). Stack the middle bunk on the bottom bunk with the help of another person.
Page 21
TRIPLE BUNK BED DL7891TBB STEP 14 Place four metal dowels (5) into the holes in the center posts (W, X, Y, Z). Stack the top bunk on the middle bunk with the help of another person.
Page 22
TRIPLE BUNK BED DL7891TBB back view STEP 15 Attach the long ladder to front side rails (H & A1 & I) with wood joint connectors (2) as shown. Use Allen key (8) to tighten the joint connectors.
Page 23
TRIPLE BUNK BED DL7891TBB back view STEP 16 Attach the short ladder to the front side rail (A1 & I) with wood joint connectors (2) as shown. Use Allen key (8) to tighten the joint connectors.
Page 24
TRIPLE BUNK BED DL7891TBB STEP 17 Insert two slats with wood dowel (T) into the center slots of the top side rails (H &J) of the upper bunk as shown. Attach slats without wood dowel (L) onto top side rails (H &J) of the upper bunk with flat head screws (4) as shown.
Page 25
TRIPLE BUNK BED DL7891TBB To convert the bunk bed into three different twin bed, remove both ladders and all the guardrails. With the help of another person, unstack the top bunk and center bunk from the lower bunk.
Page 26
TRIPLE BUNK BED DL7891TBB CAUTION: This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability or cause possible injury. DO NOT ALLOW HORSEPLAY...
Page 27
MODEL # DL7891TBB Customer Service PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S). Customer Service Phone Number 1-800-295-1980 Email: das@dorel.com Customer Service Fax Number 514-353-7819...
Need help?
Do you have a question about the DL7891TBB and is the answer not in the manual?
Questions and answers