Lighting The Oven Pilot - Whirlpool 4322452 Service Manual

NOTE: The thermostat used in the Standing Pilot range needs to be converted if L.P. gas is being
used. A "Nat" or "L.P." setting is located on the front face of the thermostat (see Figure 4-8 and its
inset).

LIGHTING THE OVEN PILOT

To light the pilot, perform the following steps (see Figure 4-9):
1. Turn off all the range controls.
2. If your range is equipped with a broiler drawer, open it and wait five minutes for any gas inside
the range to dissipate.
3. Remove the baffle and oven bottom.
4. Hold a lighted match near the tip of the pilot on the burner assembly until a flame appears.
5. Replace the baffle and oven bottom.
6. Turn on the oven thermostat and allow the burner to light.
Inset
L.P. Gas N
A
L
Setting
T
P
OFF
Adjustment
Gas "OFF"
Setting
Apply Match Flame
To Gas Outlet Of Pilot
Safety
Valve
Page 4-5
T
O
F F A
N
P
L
Oven
Thermostat
Natural Gas
Figure 4-8
Setting
Screw
Figure 4-9