Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Amigo SMARTSHOPPER
Summary of Contents for Amigo SMARTSHOPPER
- Page 1 AMIGO OWNER'S MANUAL SMARTSHOPPER, VALUESHOPPER AND VALUESHOPPER XL Models carrying the ETL Listed Mark are Listed to UL Subject 3456. Manager to Read this Manual B E F O R E Product is Floor- Operational SmartShopper ValueShopper ValueShopper XL Serial Number:...
-
Page 2: Safety First
Amigo carts. When Amigo Mobility Founder Al Thieme invented the first motorized cart in 1968, his goal was to provide an affordable, durable and user-friendly mobility solution. Now, with many years of mobility expertise, we want customers to be thrilled –... - Page 3 Labels and signage found on Amigo SmartShopper, ValueShopper and ValueShopper XL Please call 800.248.9131 if you are missing labels or need a replacement. 11833 and 11957 10799, 10800 and 11958 11834 and 11959 1-800-248-9131...
- Page 4 While in freewheeling, unit must be pushed slowly to avoid activating safety feature "push to fast." 3. To terminate freewheeling, pull manual brake lever toward Figure 2 rear of Amigo (Figure 3). Do not drive Amigo while in freewheeling mode. Figure 3 SmartShopper...
- Page 5 Park the Amigo near a grounded AC electrical outlet. Turn the power “OFF” before charging. Charging cord is located on back of the seat. Plug the end into the AC electrical outlet. Ensure the end of the cord is secure in the outlet. Park the Amigo close enough to the outlet so the AC cord is not stretched to its full capacity.
-
Page 6: Battery Specifications
• Charge batteries fully in a dry location. • If you remove the batteries from the Amigo, put them on a surface that cannot be damaged by acid fumes. Whenever a battery is charged and discharged through a cycle, it breathes. The breathing of the battery emits acid fumes and may mark surfaces it rests on for long periods of time. -
Page 7: Serial Number Locations
• Test cart's ability to travel through radio frequency security systems at front entrance of store. For operating questions call the Amigo service department @ 1-800-248-9131 or 989-777-0910, 7:30 a.m. to 6:00 p.m. (EST) Monday – Friday. Please reference serial number when calling. You may also contact us by fax at 1-800-334-7274 or email service@myamigo.com... -
Page 8: Microprocessor Controller
Figure 10 (Part No. 12038 ) Occupant Seat Switch The occupant seat switch is located under each of the SmartShopper, ValueShopper and ValueShopper XL seats. The occupant’s weight on the seat activates the switch allowing the Shopper to operate. (The Shopper is non-operational without a seat occupant. - Page 9 Models Carrying the ETL Listed Mark If your Amigo ValueShopper or Amigo ValueShopper XL carries the ETL Listed Mark, it means it has been certified by Intertek to meet UL Subject 3456. Intertek is a national safety testing laboratory recognized by OSHA.
-
Page 10: Diagnostics Codes
(3) Disconnect brake and cycle key, if code changes to 1-2, replace brake. (4) Replace controller. (1) Ensure EM brake lever is in normal/drive position (SmartShopper only). (2) Unplug handle cable and plug back in. EM Brake windings or connections are open or (3) Check all wiring connections and output. -
Page 11: General Warranty Provisions
Damage caused by battery moisture, spillage, or leakage is exclusive of warranty. Note: Lithium batteries carry the following warranty: 1.) Warranty period is 60 months; beginning when the Amigo healthcare model, electric shopping cart or batteries are shipped from AMI factory. Serial number of unit/date code on battery will be required. - Page 12 AMIGO MOBILITY INTERNATIONAL, INC. 6693 Dixie Highway, Bridgeport, MI 48722-9725 Phone (800) 248-9131 or (989) 777-0910 • Fax (800) 334-7274 • www.amigoshopper.com © 2017 Amigo Mobility International, Inc. Amigo® is a registered trademark of Amigo Mobility International, Inc. 0317-0803 RevN...
Need help?
Do you have a question about the SMARTSHOPPER and is the answer not in the manual?
Questions and answers