Cutting Unit; Serial Number - Husqvarna R 422 Ts Workshop Manual

Cutting unit

R 422 Ts and R 422 Ts AWD can be
equipped with two different cutting units.
Combi 112 and Combi 122
The Combi-unit, equipped with a BioClip-
plug, finely chops the cuttings to fertiliser.
Without the BioClip-plug the unit works in the
same way as a rear ejection unit. The rear
ejector ejects the clippings behind the unit
without finely chopping them.

Serial Number

The machine's serial number is indicated on
a plate attached to the front side under the
seat. Stated on the plate, from the top, are:
• The machine's type designation.
• The manufacturer's type number.
• The machine's serial number.
Please state the type designation and serial
number when ordering spare parts.
The engine's serial number is found on a
barcode sticker. The sticker states:
• The engine's serial number (E/NO).
• Code.
Please state these when ordering spare
parts.
The transmission's serial number is found on
the barcode sticker located on the front of the
housing on the left-hand drive shaft:
• The type designation is stated above the
barcode and starts with the letter K.
• The serial number is stated above the
barcode and has the prefix s/n.
• The manufacturer's type number is
stated under the barcode and has the
prefix p/n.
Please state the type designation and serial
number when ordering spare parts.
24
English-
DESIGN AND FUNCTION
The machine's serial number
The transmission's serial number