Table of Contents
Advertisement
8- Vertical stabilizer
PC-6 Porter
9- Horizontal stabilizer
PC-6 Porter
CA
Drill a 5/64"(2mm) diameter hole in torque
rod mounting slot, marking sure that you drill
the hole perpendicular to the leading edge of
the rudder.
Apply a thin layer of petroleum jelly
Cut away only
the covering
6
2mm
TOP-VIEW
VERTIAL STABILIZER
Apply thin CA glue
on the left (right) of
CA
the hinge.
VERTICAL STABILIZER
! Securely glue together. If coming off
during fly, you lose control of your
air plane.
Apply thin CA glue
on the top (bottom) of
CA
the hinge.
HORIZONTAL STABILIZER
! Securely glue together. If coming off
during fly, you lose control of your
air plane.
Advertisement
Table of Contents
Need help?
Do you have a question about the PILATUS PORTER PC-6 and is the answer not in the manual?
Questions and answers