NEC SL 1000 Technical Training Manual page 29

PC Specification for PC PRO
PC Specification
Item
O/S
CPU
Memory
Communication Port
Hard Disk Space
Browser
TCP Port
Setup for Direct Connection via Ethernet Cable
This is example to access Web PRO via Ethernet Cable. (Direct Connection)
1. Directly connect between "ETHERNET" port on CPU Slot and PC
by Ethernet Cross Cable.
2. TCP/IP is set to "192.168.0.1" on PC.
3. Open Browser and type "http://192.168.0.10".
(This IP Address is default setting for CD-CP00 Blade. "HOT Start" is necessary if it is changed.)
Page 29
© NEC Corporation 2009
บริ ษ ั ท โปรเฟสชั � น แนล พี เ อบี เ อ็ ก ซ์ จํ า กั ด โทร. 02-519-1718 Hotline. 084-920-5065
Required Specification
Microsoft Windows 2000, XP and Vista
Pentium III 598MHz or higher
<Pentium 4 2.5GHz is recommended>
128MB <256MB is recommended>
LAN, Analog Modem, Serial (for ISDN TA)
25MB for PCPRO
Internet Explorer (6.0 or higher) for Web PRO
8000
NEC Confidential
• Allow to use Cookie which is
saved on PC : Enable
• Allow to use Cookie for each
session : Enable
• Active Scripting : Enable