Group 28
MID 128 PID 94 Fuel Delivery Pressure
D7C and D12C
In addition to the fuel pressure, the sensor also measures the fuel temperature.
Fault Codes
FMI 1
Pressure too low.
Conditions for fault code:
•
The voltage on EA27 is below the alarm limit.
Possible cause:
•
Clogged fuel filter.
•
Air in fuel system.
•
Opening pressure too low on overflow valve.
•
Worn out fuel pump.
•
Mechanical fault in sensor.
Reaction from the EECU:
•
Fault code is set.
•
Yellow lamp is requested.
Noticeable external symptom:
•
Yellow lamp lights up.
•
Low power output.
•
Difficult to start.
•
Blue smoke.
FMI 3
Short circuit to voltage or permanent loss of signal.
Conditions for fault code:
•
The voltage on EA27 is below the alarm limit.
Possible cause:
•
Short circuit to voltage, 5 V supply wire
•
Short circuit to voltage, signal wire.
•
Fault in sensor.
Reaction from the EECU:
•
Fault code is set.
•
Yellow lamp is requested.
Noticeable external symptom:
•
Yellow lamp lights up.
FMI 4
Short circuit to ground.
Conditions for fault code:
•
The voltage on EA27 is under 0.08 V.
Possible cause:
•
Break, 5 V supply wire.
•
Break, signal wire.
•
Break, ground wire.
•
Short circuit to ground, 5 V supply wire.
•
Short circuit to ground, signal wire.
•
Fault in sensor
Reaction from the EECU:
•
Fault code is set.
•
Yellow lamp is requested.
Noticeable external symptom:
•
Yellow lamp lights up.
Troubleshooting
105
Need help?
Do you have a question about the TSI and is the answer not in the manual?
Questions and answers