Advertisement
Configuring the eSpace 7903X
eSpace 7910
eSpace 7910
The eSpace 7903X has 20 programmable buttons and two paging control buttons. The eSpace 7903X provides a
maximum of 40 programmable buttons by turning pages.
You can configure different functions (such as Speed Dial, Phone Lock, and Sleep) for these buttons as required.
For example, to assign the Speed Dial function to the first programmable button on the eSpace 7903X, perform the
following operations:
1.After the eSpace 7950 is connected to the eSpace 7903X, hold down the first programmable
eSpace 7903X for about five seconds. The Expansion Module screen of the eSpace 7950 is displayed.
2.Press the navigation
3.Enter a number such as 123456 in the Number text box.
Alternatively, press the Contact or History
4.Enter a label such as Linda in the Label text box.
5.Select an account such as 666666 in Select Callout Account to make a call.
6.Press the
Done
softkey. The label Linda corresponding to the programmable
7903X's LCD screen.
NOTE
You can also configure the programmable buttons of the eSpace 7903X by logging in to the eSpace 7950's web page.
For details, see the eSpace 7950 IP Phone User Guide or contact your system administrator.
使用
eSpace 7910
eSpace 7910
Using the eSpace 7903X
After you assign a function to a programmable
For example, according to the previous example, you have assigned the Speed Dial function to the first
programmable button on the eSpace 7903X.
In standby mode, after you press the first programmable
uses the account 666666 to make a call to the number 123456.
eSpace 7910
eSpace 7910
Q&A
Q:What can I do if the eSpace 7903X displays a blank screen after the eSpace 7950 is powered on?
A:The possible causes and solutions are as follows:
Check whether the cable that connects the eSpace 7903X and the eSpace 7950 is loose.
If the cable is loose, reconnect the cable.
If a cascaded eSpace 7903X displays a blank screen, check whether the cascaded eSpace 7903X is
connected to the external power supply.
If they are not connected, connect them
Q:How can I adjust the brightness of the eSpace 7903X's backlight?
A:The brightness of the eSpace 7903X's backlight is synchronized with the brightness of the eSpace 7950's
backlight. You can adjust the backlight brightness on the eSpace 7950.
For details, see the eSpace 7950 IP Phone User Guide.
Q:How do I to log in to the eSpace 7903X's web page and set the programmable button?
A:1. On the PC, open a web browser and type the IP address of the IP phone, for example, http://192.168.1.72.
2. On the login page, enter your account and password.
(The default account and password are those used to log in to the IP phone.)
3. Choose Buttons > Expansion Module.
4. Click the grey button next to the programmable button on the expansion module.
5. Select a function to use and set the parameters.
eSpace 7910
eSpace 7910
Qualification Card
Inspector:
buttons
to select Speed Dial. The Speed Dial screen is displayed.
.
pass
softkey
. Select a contact and press the
button
, you can press this
button
on the eSpace 7903X, the eSpace 7950
button
Add softkey.
button
is displayed on the
button
to implement the function.
on the
eSpace
Advertisement
