Maintenance
Simple spectrum analyzer (monitoring the wireless
signal level)
This function monitors the level of wireless signals near 1.9 GHz.
1
Connect with a microphone, or receiver.
2
Select the [Simple Spectrum Analyzer] tab.
A Antenna selection setting (only when a receiver is connected)
Select the antenna for the simple spectrum analyzer.
B Simple spectrum analyzer [Start]/[Stop] buttons
Click the [Start] button to run the simple spectrum analyzer using the selected antenna. Click the [Stop] button to stop
the simple spectrum analyzer.
C Simple spectrum analyzer result display
Area to display the simple spectrum analyzer results. The wireless signal level is displayed for each frequency.
3
Click the [Start] button.
● When a receiver is connected, the [PWR] indicator of the microphone will blink orange and no audio will be output.
● When a microphone is connected, the [PWR] indicator of the microphone will blink green and no audio will be output.
The simple spectrum analyzer results are displayed.
Click the [Stop] button to stop.
● The [PWR] indicator of the microphone goes off once before the microphone returns to the normal status.
A
C
[Maintenance] — [Simple Spectrum Analyzer] screen
B
12