Related Manuals for Econolux UBKCC30BV.2
Summary of Contents for Econolux UBKCC30BV.2
- Page 1 Ceramic Hob Instruction Manual / Installation Manual MODEL: UBKCC30BV.2 UBKCC60BV.2...
-
Page 2: Safety Warnings
SAFETY WARNINGS PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE. Installation Electrical Shock Hazard • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. • Connection to a good earth wiring system is essential and mandatory. - Page 3 • This appliance is to be properly installed and earthed only by a suitably qualified person. • This appliance should be connected to a circuit which incorporates an isolating switch providing full disconnection from the power supply. • WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance.
- Page 4 • During use, accessible parts of this appliance will become hot enough to cause burns. • Do not let your body, clothing or any item other than suitable cookware contact the ceramic glass until the surface is cool. • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
- Page 5 • Do not store items of interest to children in cabinets above the appliance. Children climbing on the cooktop could be seriously injured. • Do not leave children alone or unattended in the area where the appliance is in use. •...
- Page 6 • Care should be taken to avoid touching heating elements. • Children less than 8 years of age shall be kept away unless continuously supervised. • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the...
-
Page 7: Product Overview
Product Overview Top View 1. max. 1800 W zone 2. max. 1200 W zone 3. Control panel UBKCC30BV.2 1. max. 1800 W zone 2. max. 1200 W zone 3. max. 1800 W zone 4. max. 1200 W zone 5. Control panel... -
Page 8: The Control Panel
The Control Panel UBKCC30BV.2 UBKCC60BV.2 1. ON/OFF switch 3. Residual heat indicator 2. Knob power control 4. Heating zone... -
Page 9: Product Information
Product Information The ceramic/induction hob can meet different kinds of cuisine demands because of resistance wire heating, micro-computerized control and multi-power selection, really the optimal choice for modern families. The hob centers on customers and adopts personalized design. The hob has safe and reliable performances, making your life comfortable and enabling to fully enjoy the pleasure from life. -
Page 10: Using Your Hob
Always lift pans off the ceramic hob – do not slide, or they may scratch the glass. Using your Hob To start cooking After power on, the buzzer beeps once, the indicators light up for 1 second then go • out, indicating that the hob has entered the state of standby mode. -
Page 11: When You Have Finished Cooking
When you have finished cooking Select the cooking zone that you wish to swich off. 2. Turn the cooking zone off by scrolling “knob” control to left to“OFF”. The Residual heat indicator will flash. Turn the whole cooktop off by touching the ON/OFF control. -
Page 12: Cooking Guidelines
Cooking Guidelines ke care when frying as the oil and fat heat up very quickly, particularly if you’re using Boost. At extremely high temperatures oil and fat will ignite spontaneously and this presents a serious fire risk. Cooking Tips • When food comes to the boil, reduce the power setting. -
Page 13: Heat Settings
3. Preheat the pan briefly and add two tablespoons of oil. 4. Cook any meat first, put it aside and keep warm. 5. Stir-fry the vegetables. When they are hot but still crisp, turn the cooking zone to a lower setting, return the meat to the pan and add your sauce. 6. -
Page 14: Care And Cleaning
Care and Cleaning What? How? Important! Everyday soiling on glass 1. Switch the power to the cooktop off. • When the power to the cooktop is (fingerprints, marks, 2. Apply a cooktop cleaner while the switched off, there will be no ‘hot stains left by food or glass is still warm (but not hot!) surface’... -
Page 15: Hints And Tips
See ‘Choosing the right Unsuitable, abrasive scourer or cookware’. Cleaning products being used. See ‘Care and cleaning’. Technical Specification Ceramic Hob UBKCC30BV.2 Cooking Zones 2 Zones Supply Voltage 220-240V~ 50/60Hz Installed Electric Power 2900W Product Size D×W×H(mm) 290×520×50 Building-in Dimensions A×B (mm) -
Page 16: Selection Of Installation Equipment
H(mm) D(mm) A(mm) B(mm) X(mm) UBKCC30BV.2 50 mini UBKCC60BV.2 50 mini Under any circumstances, make sure the hob is well ventilated and the air inlet and outlet are not blocked. Ensure the hob is in good work state. As shown below Note: The safety distance between the hotplate and the cupboard above the hotplate should be at least 760mm. - Page 17 A(mm) B(mm) C(mm) 50 mini 20 mini Air intake Air exit 5mm Before you install the hob, make sure that Tthe work surface is square and level, and no structural members interfere with • space requirements. • The work surface is made of a heat-resistant material. •...
-
Page 18: Before Locating The Fixing Brackets
When you have installed the hob, make sure that • The power supply cable is not accessible through cupboard doors or drawers. • There is adequate flow of air from outside the cabinetry to the base of the hob. • If the hob is installed above a drawer or cupboard space, a thermal protection barrier is installed below the base of the hob. - Page 19 Cautions The hob must be installed by qualified personnel or technicians. Please never conduct the operation by yourself. The hob shall not be mounted to cooling equipment, dishwashers and rotary dryers. The hob shall be installed such that better heat radiation can be ensured to enhance its reliability.
- Page 20 UBKCC60BV.2 If the cable is damaged or needs replacing, this should be done by an after-sales technician using the proper tools, so as to avoid any accidents. If the appliance is being connected directly to the mains supply, an omnipolar circuit breaker must be installed with a minimum gap of 3mm between the contacts.
- Page 21 Energy data sheet...
- Page 24 This appliance is labeled in compliance with European directive 2012/19/EU for Waste Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is disposed of correctly, you will help prevent any possible damage to the environment and to human health, which might otherwise be caused if it were disposed of in the wrong way.
Need help?
Do you have a question about the UBKCC30BV.2 and is the answer not in the manual?
Questions and answers