Mr. Christmas Christmas Cable Cars Manual

Advertisement

I. DESCRIPTION
Thank you for purchasing the Christmas Cable Cars. This product features cable cars that travel between a base on the ground
and your tree top. The gift box includes a red cabin and a green cabin attached by strings, a red cable car, a green cable car and an
adapter. This product is not a toy and is not intended for use by children.
II. OPERATION
1. Gently lift the pieces from the packaging.
2. Place the red cabin on your tree top, firmly positioning the
cylindrical mount on the top of your tree.
3. Place green base cabin on the floor at a distance such that the
strings are taut between the two cabins. Cable cars should be
hanging still on the strings.
4. Insert adapter into the green base cabin. Plug the adapter into
a nearby power source.
The adapter is intended to be correctly oriented in a
vertical or floor mount position.
7. Turn the unit ON. Cable cars will begin to move between the
top cabin and the base.
III. TROUBLESHOOTING
Your Christmas Cable Cars has been designed to give many seasons of trouble-free operation. In the event that a problem does
occur, please refer to the following chart for suggested solutions.
Problem
Cars will not move, are stuck or
are traveling erratically
PLEASE NOTE: For more information about this product please call 1-800-4MR-XMAS or visit our website at
<www.mrchristmas.com>. We will be happy to help you!
IV. SAFETY WARNINGS AND INSTRUCTIONS
WARNING: THIS IS NOT A TOY! THIS PRODUCT CONTAINS SMALL PARTS WHICH COULD
CAUSE CHOKING IF SWALLOWED.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT
REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. IF SERVICING IS NEEDED, SEND TO QUALIFIED
SERVICE PERSONNEL.
http://www.mrchristmas.com
THIS PRODUCT IS NOT A TOY
CHRISTMAS CABLE CARS
Likely Cause
Solution
Make sure the adapter is plugged into a working outlet and the adapter jack
No power
is securely attached to the back of the unit
Power is interrupted
Turn power OFF and then ON again
Strings are twisted,
Turn power OFF and then find tangled or twisted part and adjust
tangled or not taut
Adjust base unit so that strings carrying the cable cars are
Strings are not taut
taut, with the cars hanging unobstructed
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Christmas Cable Cars and is the answer not in the manual?

Questions and answers

Summary of Contents for Mr. Christmas Christmas Cable Cars

  • Page 1 I. DESCRIPTION Thank you for purchasing the Christmas Cable Cars. This product features cable cars that travel between a base on the ground and your tree top. The gift box includes a red cabin and a green cabin attached by strings, a red cable car, a green cable car and an adapter.
  • Page 2 Mr. Christmas warrants the original customer/purchaser of Christmas Cable Cars that it will be free from defects in material and workmanship for a period of ninety (90) days from date-of-purchase. Any liability of Mr. Christmas under this warranty shall be limited to the repair or replacement of defective parts without charge if the item is returned with shipping charges prepaid together with proof of date-of-purchase, name and mailing address of the original consumers/purchasers.
  • Page 3 I. BESCHREIBUNG Vielen Dank für den Kauf des CHRISTMAS CABLE CARS. Dieses Produkt enthält eine Seilbahn, die Herauf und herunter fährt, vom Boden bis zur Spitze des Weihnachtsbaumes. Die Geschenkverpackung enthält eine rote und eine grüne Kabine; an einem Seil hängend, ein rotes und ein grünes Basishäuschen und ein Netzteil.
  • Page 4 Problem möglicher Grund Lösungsvorschlag Gehen Sie sicher, dass das Netzteil in eine funktionierende Steckdose eingesteckt ist. Überprüfen Sie ob der Keine Energiezufuhr Netzteilstecker richtig in die Netzteilbuchse an der Rückseite des Gerätes eingesteckt ist. Die Kabinen bewegen sich nicht, hängen fest, oder fahren Schalten Sie den EIN/AUS Schalter auf OFF und danach auf Die Energiezufuhr ist unterbrochen.
  • Page 5 3. Placer la base rouge au sol à une distance telle que les cordons soient tendus entre les deux bases de téléphérique . Les télécabines doivent auparavant être accrochées aux cordons 4. Insérer la prise du transfo dans l’emplacement prévu sous la base rouge. Ensuite brancher le transformateur dans une prise de courant/secteur 5.

Table of Contents