Encrypting The Camera Image In Transport Mode - Panasonic CQ-DF602U Operating Instructions Manual

Operating Instructions
2.5 Encrypting the Camera Image in Transport
Mode
The camera can encrypt images using IPsec transport mode.
Note
• If you use IPsec, the refresh interval increases.
1.
Click [IPsec] on the Setup page.
2.
Click Camera in the Transport column.
• If you use transport mode for E-mail or FTP transfer, click No. in the Buffer/
Transfer column.
Set to use
Alarm Log.
(See page
137)
Set up these settings to transfer images in transport mode (see page 131).
Note
• To display an Alarm Log, set Alarm 1, Alarm 2 or Motion Detection for the
Trigger Setting and check [Enable].
3.
Enter each parameter in the relevant data field.
60
The display shows
that the
communication is
in HTTP and
anyone can
access the
camera if they
have the pre-
shared key.