Samsung Galaxy S7 User Manual page 53

Basics
Transferring data using a USB connector
You can connect your previous device to your device with the USB connector and a USB cable
to easily and quickly transfer data.
1
Plug the USB connector into the multipurpose jack of your device.
2
Connect your device and the previous device using the previous device's USB cable.
Previous device
3
When the app selection pop-up window appears, tap Smart Switch → RECEIVE.
4
On the previous device, tap ALLOW.
Your device will recognise the previous device and a list of data you can transfer will
appear.
5
Follow the on-screen instructions to transfer data from the previous device.
Do not disconnect the USB cable or USB connector from the device when you are
transferring files. Doing so may cause data loss or device damage.
Transferring data increases the battery power consumption of your device. Ensure
that your device is sufficiently charged before transferring data. If the battery power is
low, data transfer may be interrupted.
Your device
1
2
53
USB connector
USB cable