Changing The Remote Control Code - Panasonic DMR-E50K Operating Instructions Manual

Changing the remote control code

DVD
VCR Plus+ TV/VIDEO REC MODE REC
Numbered
1
buttons
4
7
DIRECT NAVIGATOR
TOP
MENU
3, 4, 2, 1
ENTER
FUNCTIONS
PROG/CHECK
OPEN/CLOSE
SETUP
SETUP
ERASE
Panasonic DVD players and recorders use the same remote control
system so they may respond unintentionally to a command from this
remote control. Change the code on this unit and its remote control
(the two must match) if you place equipment close together.
≥Use "1", the factory set code, under normal circumstances.
POWER TV
DVD TV
Í Í
2 3
CH
6
5
VOLUME
8 9
CANCEL
0 100
SKIP SLOW/SEARCH
PLAY LIST
MENU
ENTER
RETURN
ADD/DLT CM SKIP TIME SLIP
STATUS FRAME
AUDIO INPUT SELECT DISPLAY
F Rec POSITION MEMORY MARKER
1
While stopped
Press [SETUP] to show the menus.
SETUP
Channel
Set Up
Disc
Video
Audio
Display
TV Screen
2
Press [3, 4] to select "Set Up" and
press [1].
3
Press [3, 4] to select "Remote Con-
trol Code" and press [ENTER].
4
Press [3, 4] to select the code (1, 2,
or 3) and press [ENTER].
The remote control code on the unit has been set.
5
While pressing
remote control, press the numbered
button ([1], [2] or [3]) corresponding
to the code you selected in step 4.
The remote control code on the remote control has been set.
6
Press [SETUP]
The following display appears when you use a remote control with a
different code.
The unit's remote control code
If you are trying to use this unit's remote control, change its code to
match the unit's ( step 5).
Antenna System CATV
Auto Channel Setting
Channel Caption
Preset Channel Caption
Manual Channel Caption
VCR Plusi CH Setting
TAB SELECT
RETURN
[ENTER] on the
RQT6920
45