Tools Required:
7/16 wrench and socket
1/2 wrench and socket
9/16 wrench and socket
Rubber Mallet
3/4 wrench and socket
15/16 wrench and socket
11/16 wrench and socket
Ratchet corresponding to sockets
½" Torque wrench (150 ftlbs +)
3/8" Torque wrench (10 ftlbs +)
*IMPORTANT NOTES are to be in RED BOLD type.
*REGULAR NOTES are to be in Blue
During installation, inspections, and required maintenance, it is important to make sure all bolted
connections are properly torqued. The chart below shows the proper torque for fasteners used in
this product. All fasteners should be torqued to the values indicated in the chart unless a fastener
has a specific torque noted in the instructions or the production prints.
HEIGHT ADJUSTER
INSTALLATION INSTRUCTIONS
type.
3