VCR Connection
Follow this diagram when connecting your television to a VCR only.
S-VIDEO
ANT INPUT
ANT OUTPUT AUDIO
VCR
Note: The remote control must be programmed with supplied codes to operate the VCR (see page 49, 50).
Viewing a television program
Procedure
1. Select ANT1 in the SET UP menu.
2. Tune the television to the television program you would like to view.
Viewing a video
Procedure
• Option A
1. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
2. Begin the video.
• Option B
1. Select ANT2 in the SET UP menu.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.
Recording a television program
Procedure
• Option A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you would like to record.
4. Begin recording.
• Option B (Recording one program while viewing another program)
1. Select ANT1 in the SET UP menu.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.
3. Using the VCR, tune to the television program you would like to record.
4. Begin recording.
5. Press the TV/VIDEO button on the remote control to switch back to TV mode.
6. Tune the television to the program you would like to view.
Incoming Cable
VIDEO
L
R
CABLES NOT SUPPLIED
CONNECTIONS ON BACK OF TV
DIGITAL
IN
Y
VIDEO
P
B
ANT1
P
R
SPLIT
OUT
L
ANT2
AUDIO
R
Cable Connection
COMPONENT VIDEO INPUT
1
2
INPUT
1
2
3
S-VIDEO
PROG
OUT
R
Use either the S-Video or the
Video connection.
VIDEO
L
TO AUDIO
AMP
9