Figure 3: Skymanage Home Page - Gilat Satellite Networks SkyEdge II Installation Manual

1. To open the SkyManage web page type 192.168.1.1 in the address bar and click
The home page, viewable by all users, contains the following information (for an
operational VSAT additional parameters are shown):
2. Click Info to open the page (Figure 4) showing the hardware and software
SE VSAT Install and Monitor
May, 2007
to open.
Result: The SkyManage home page opens (Figure 3).

Figure 3: SkyManage Home Page

The VSAT status (in this case Boot) is shown by the logo in the upper left corner
Active code type - Boot or Operational
Outbound Lock state – Unlocked or Locked
LAN Port 1 and 2– speed and duplex mode mode
Powering mode – Normal/Low Power/Power Save
Operation time – time since VSAT was powered on or reset
components of the VSAT
Proprietary and Confidential
SkyEdge II VSAT Installation and Monitoring
4