Before First Use; Assembly Of The Cordless Sweeper - Silvercrest SABD 3.7 LI D4 Operating Instructions Manual

WARNING! RISK OF INJURY!
This product contains rechargeable batteries. Do not throw the
►
batteries into a fire and do not subject them to high temperatures.
There is a risk of explosion!
Do not use the appliance as a toy.
►
Never leave children unsupervised in the vicinity of the appliance!
►
ATTENTION! PROPERTY DAMAGE!
Only charge the appliance with the mains adapter/charger supplied
►
(Type ZD006C053055BSE)!
Only this cordless sweeper may be charged with the supplied
►
battery charger; the charger is not suitable for other batteries.
Never attempt to recharge non-rechargeable batteries.
►
Before first use
■ Remove the packaging material from the
appliance including the plastic cap
safeguards the on/off switch
unintentional pressure during transport.

Assembly of the cordless sweeper

2
■ Attach the handle
Fit the 3 handle elements 2 together by
–
pushing the push-in connection into the
handle. Press the knob 4 on the push-in
connection inwards and push it into the
handle so that the head 4 engages in
the recess on the handle 5.
2
elements are now firmly fixed together
(see Figure B on the foldout page).
–
Push the assembled handle
push-in connection into the holder
appliance and rotate the handle until it
engages.
■ Fitting the dirt container
│ GB │ IE │ NI │ CY
■ 4
8
, which
6
from
:
The handle
2
with the
3
on the
0
on the appliance:
SABD 3.7 LI D4