Table of Contents
Advertisement
VARIOUS RECORDING SETTINGS
Long recording
(pages 42 - 43)
2 times or 4 times long stereo recording is possible.
In the monaural mode, you can make a recording twice as
long as in the stereo mode (SP).
1. Press the REC button.
2. Select the recording mode by press the MODE button.
For an 80 minute MiniDisc:
SP
LP2
80 min. in stereo 160 min. in stereo 320 min. in stereo 160 min. in stereo
Creating track numbers automatically
(pages 44 - 45)
You can select the numbering method for analog record-
ing from audio equipment or a microphone.
[Operate with the battery charge stand or remote control.]
( ) indicates operations on the remote control.
1. Press the REC button.
2. Press the MENU button.
3. Press the
or
press the ENTER (
) button.
4. Press the
or
button to select the numbering
method.
For audio equipment: LEVEL-AUTO (numbering with
silence lasting 1 second or more), TIME 10min, TIME
5min, TIME 3min, OFF
For microphone: TIME 10min, TIME 5min, TIME
3min, OFF
5. Press the ENTER (
Creating track numbers manually
While recording, press the REC button at the point
where you wish to create a track number. The track num-
ber increases by one.
(pages 42 - 47)
LP4
MONO
button to select "MARK" and
) button.
(page 46)
Checking the remaining recording time
(page 47)
Press the DISP button while recording is paused or in
progress.
About the TOC (Table of Contents)
After recording or editing, TOC Indicator is displayed.
While recording, TOC Indicator appears on the display.
While TOC Indicator is displayed, you cannot eject the
MiniDisc. Eject it after turning off the power.
(pages 50 - 53)
PLAYBACK
Listen to the sound through headphones, or place the unit
on the battery charge stand to use connected speakers.
1. Insert a MiniDisc.
2. When listening through headphones:
Plug in the remote control and headphones.
Make sure the direction and insert the plug fully.
When listening through stereo components:
Connect stereo components to the AUDIO OUT termi-
nal on the battery charge stand and place the unit on it.
When listening through speakers with built-in amplifier:
(1) Connect speakers with built-in amplifier to the SP
OUT terminal on the battery charge stand and place
the unit on it.
(2) Set the audio output selector switch to "MD".
3. Start playback by pressing the
When you insert a playback-only MiniDisc or a MiniDisc
which is protected against accidental erasure, playback
will begin automatically.
4. Press the – or + button to adjust the volume (0 - 30).
PORTABLE MD RECORDER DMC-S9NET
(page 47)
button.
125
Advertisement
Table of Contents
