Code Examples; Using The Kit Code Example - Cypress PSoC CY8CKIT-048 Manual

4.

Code Examples

The PSoC Analog Coprocessor Pioneer Kit includes five code examples. To access these code
examples, download and install the PSoC Analog Coprocessor Pioneer Kit setup file from
www.cypress.com/CY8CKIT-048. After installation, the code examples will be available from
Examples and Kits > Kits under PSoC Creator Start Page. For more code examples, visit the
PSoC 3, PSoC 4, and PSoC 5LP code examples
available across application notes, kits, and PSoC Creator.
4.1

Using the Kit Code Example

Follow these steps to open and use the code examples.
1. Launch PSoC Creator from Start > All Programs > Cypress > PSoC Creator <version> >
PSoC Creator <version>.
2. On the Start page, expand CY8CKIT-048 under Examples and Kits > Kits. A list of code
examples appears, as shown in
3. Click on the desired code example, select a location to save the project, and click OK.
Figure 4-1. Open Code Example from PSoC Creator
PSoC Analog Coprocessor Pioneer Kit Guide, Doc. # 002-11190 Rev. *B
page, which lists all PSoC Creator code examples
Figure 4-1.
36