Installing The Xyzrobot Editor Software; Overview; Installing The Xyzrobot Editor - XYZ Robot BOLIDE CRAWLER User Manual

Setup Your Bolide

Installing the XYZrobot Editor Software

Overview

The XYZrobot Editor is designed specifically to allow for easy creation of poses and action sequences
for use with the Bolide Crawler.
Prior to installation, you will need to have the Adruino software and the Bolide driver code installed on
your computer system and MCU board, respectively.
See the following section for step-by-step instructions on installing the XYZrobot Editor software.

Installing the XYZrobot Editor

Before installing the Editor, download the driver from http:\\www.xyzrobot.com.
1. Locate the downloaded driver file.
2. Click setup.exe to run the application.
The Launching Application window displays. Follow the on-screen prompts to continue.
NOTE: At the time of writing, the file and folder names were under development. File and folder
names may differ after production.
3. Click Install to install the XYZrobot Editor.
02