Quick Installation
Guide
Repeater Mode
Method One: Using Web browser
1
Power ON
1. Switch the mode selector to Repeater position.
2. Plug the Device into an electrical outlet near your Wi-Fi router.
3. Shift the power switch to ON and wait until the POWER LED is on and
solid green.
2
Connect to the Device
1. Disconnect the Ethernet (Wired) connection if using a laptop or PC.
2. Connect your device to extender's Wi-Fi Cudy-RE300.
Not connected
Connections are available
Wireless Network Connection
Cudy-RE300
Connect
Connect automatically
Hardware Overview
1
3
2
WPS
8
9
3
Configure
1. Launch a web browser and type 192.168.10.254 (or http://ap.setup/)
in the address field. Enter admin for password to login.
Wi-FI Range Extender
admin
English
Login
2.Click Wizard.
Repeater
This Device
Router
Speed
Clients
Internet
0
KB/S
1
Disconnect
Device Information
WAN Type
Repeater
Wi-Fi SSID
Cudy-xxxx
Device IP
192.168.10.254
Channel
5
Gateway
192.168.10.254
Uptime
00h:01m
DNS1
0.0.0.0
Firmware
M78N_V3130.0604
DNS2
0.0.0.0
WAN MAC
82:3F:5D:06:1A:FC
Status
Wizard
Wi-Fi
Setup
1
Power On/Off
2
Mode Selector
3
WPS Button
4
WLAN LED
4
5
Power/WPS LED
5
6
WAN/LAN LED
6
7
LAN LED
7
8
LAN Port
10
9
WAN/LAN Port
10
Reset Button
3. Select a Wi-Fi SSID of your router (Host Wi-Fi) and enter the password.
Either keep the same SSID as your host Wi-Fi or create a new name for
the extended network.
Connect to:
Wi-Fi Password:
Select a Wi-Fi
Cudy-XXXX
Cudy-XXXX-5G
Cudy-Guest
4. Verify your wireless settings and click Connect. The WLAN LEDs
should turn on and stay solid,indicating successful connections.
4
Relocate
1. Plug the Device into an electrical outlet about halfway between your
router(Host Wi-Fi) and the Wi-Fi dead zone. The location you choose
must be within the range of your existing host Wi-Fi.
2. Wait until the WLAN LEDs are ON. If the signal is weak, relocate it
closer to the router to achieve a good (or better) signal quality.
Default Parameters
Web Setup: http://ap.setup/
Default IP: 192.168.10.254
Password: admin
SSID:Cudy-RE300
Repeater Wizard
Connect
Manually enter
Need help?
Do you have a question about the RE300 and is the answer not in the manual?
Questions and answers