Advertisement
Base attachment FDB291
Designation plate FDBZ291
DBZ1190-AA micro terminal and DBZ1190-AB connection terminal
Base attachment humid FDB293
Designation plate DBZ1193A
Protective cage DBZ1194
4
Building Technologies
Fire Safety
Function:
For routing surface-mounted cables larger than Ø 6 mm
Detector base is secured with a snap fastener
For labeling with the location address
Can only be used without detector base seal FDBZ295
Micro terminal DBZ1190-AA
–
Cable cross section up to max. 0.5 mm²
Connection terminal DBZ1190-AB
–
Cable cross section up to max. 2.5 mm²
–
For connecting two external alarm indicators or the cable shielding
For achieving a higher protection category
For mounting in wet or humid environments
Required when using detector heating unit FDBH291
Required when using protective cage DBZ1194 or EMC-protective cage
FDBZ294
Mounted between detector base and ceiling
Detector base mounted quickly: The detector base simply clicks into place in
base attachment humid FDB293.
For labeling with the location address
Can only be used with base attachment wet FDB295/BA721 or base
attachment humid FDB293
To protect the alarm sounder from damage
Can only be mounted in combination with the base attachment humid FDB293
or base attachment wet FDB295/BA721
A6V10229545_g_en_--
2018-06-15
Advertisement
