Advertisement
Windows Demonstration Software - LabVIEW Application Installation:
1. Go to
www.eu.industrial.panasonic.com/grideye-evalkit
Demo Software package.
(LabVIEW Run-Time Support is included)
2. Open the zip file and run "setup.exe".
3. After installation, connect the Grid-EYE board via USB to the PC. Red LED will blink
indicating data transfer.
4. Open Control Panel >> Device Manager and check COM port of the device:
It is detected as a 'Grid Eye Sensor Board (COM X)'. (If it is not detected, please
reinstall the USB driver from the
www.eu.industrial.panasonic.com/grideye-evalkit)
5. Run Grid-EYE application (Windows Start >> Grid-EYE >> Open Grid-EYE
application).
(If compatibility issues are encountered , reinstall the LabVIEW Run-Time Engine
2014 from
www.ni.com
versions)
6. Select the appropriate COM-port. Click 'Open COM' to view the data fed to the PC
from the Grid-EYE sensor.
7. Temperature values can be observed on the LabVIEW (8 x 8) matrix window.
Colours for the heat map can be set between
tab shows an interpolation of the raw signal.
Panasonic Automotive & Industrial Systems Europe GmbH
Panasonic homepage
or from supplied folders containing both 32bit and 64bit
and download the LabVIEW
or
-20°C and +100°C. The second
2
Quick Start Guide
Advertisement
