Xtreme Power 82104 Owner's Manual And Safety Instructions
  1. Manuals
  2. Brands
  3. Xtreme Power Manuals
  4. Chainsaw
  5. 82104
  6. Owner's manual and safety instructions

Xtreme Power 82104 Owner's Manual And Safety Instructions

52cc chainsaw 20” 2.7hp epa gasoline crankcase
Hide thumbs

Advertisement

Table of Contents

52CC CHAINSAW 20" 2.7HP EPA GASOLINE CRANKCASE
OWNER'S MANUAL AND SAFETY INSTRUCTIONS
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT'S
SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 0880 MON-FRI 9AM TO 3PM PST
AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
ITEM: 82104

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 82104 and is the answer not in the manual?

Questions and answers

Summary of Contents for Xtreme Power 82104

  • Page 1 52CC CHAINSAW 20” 2.7HP EPA GASOLINE CRANKCASE ITEM: 82104 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).

  • Page 2: Important Safety Information

    IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. SAFETY The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.
  • Page 3 IMPORTANT SAFETY INFORMATION Stay alert, watch what you are doing, and use common sense when operating the tool. DO NOT use the tool while you are tired or under the influence of drugs, alcohol, or medication. Dress properly. DO NOT wear loose clothing, dangling objects, or jewellery. Keep your hair, clothing and gloves away from moving parts.
  • Page 4 IMPORTANT SAFETY INFORMATION The engine of this chainsaw is designed to run on a mixed fuel which contains highly flammable gasoline. Never store cans of fuel or refill the fuel tank in any place where there is a broiler, stove, fire, electrical sparks, welding sparks or any other source of heat or fire which may ignite the fuel.

  • Page 5: Diagrams And Specifications

    DIAGRAMS AND SPECIFICATIONS NOTE: The appearance of your product may vary from the item shown. MACHINE SYMBOLS: For safe operation and maintenance, symbols are carved in relief on this machine. Please take a moment to locate these symbols on the chainsaw. a) The port to refuel the “Mix Gasoline”, located on the Fuel Tank Cap b) The port to refuel the “Chain Oil”, located on the Oil Cap c) Switch indicator.
  • Page 6 DIAGRAMS AND SPECIFICATIONS GUIDE BAR AND SAW CHAIN PARTS LIST: A standard chainsaw unit package contains the items illustration in Figure F1. Open the box and install the guide bar and the saw chain on the power unit as follows. 1.
  • Page 7 DIAGRAMS AND SPECIFICATIONS A new chain will expand its length in the beginning of use. Check and readjust the tension frequency as a loose chain can easily derail or cause rapid degradation of the chain as well as the guide bar. FUEL AND CHAIN OIL: Mix gasoline (leaded or unleaded, alcohol-free) and quality proven 2-stroke motor oil (FC grade) for air cooled 2-cycle engines.
  • Page 8 GUIDELINES CHAIN OIL: The chain oil flow can be changed by inserting a screwdriver in the hole on the bottom of the clutch side. Adjust according to your work conditions. (F13) NOTE: the oil tank should become nearly empty by the time fuel is used up. Be sure to refill the oil tank every time when refuelling the unit.
  • Page 9 GUIDELINES STOPPING THE ENGINE: Before stopping the engine, keep the engine idling for 1 to 2 minutes. 1. Release the throttle lever to allow the engine idling for a few minutes. 2. Put the switch to the “O” (Stop) position (F17) SAWING: It is recommended to first practice sawing easy logs.
  • Page 10 GUIDELINES SPARK PLUG: Clean the electrodes with a wire brush and reset the gap to .65mm as necessary. SPROCKET: Check for cracks as well as for excessive wear interfering with the chain drive. If the wearing is found, replace it with a new one. Never fit a new chain on a worn sprocket nor a worn chain on a new sprocket.

  • Page 11: Maintenance

    MAINTENANCE BREAK DOWN ANALYSIS GUIDE...

  • Page 12: Maintenance And Troubleshooting

    MAINTENANCE AND TROUBLESHOOTING 20 in...
  • Page 13 QUICK START GUIDE 1. Lay out your tools 2. Mix the oil 3. Check that the chain brake is in the unlocked position by pulling the front hand guard toward the front handle 4. Loosen and remove the bar nuts and the clutch cover from the saw 5.

  • Page 14: Parts Diagram

    PARTS DIAGRAM...

  • Page 15: Parts List

    PARTS LIST...

  • Page 16: Warranty

    WARRANTY PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.

This manual is also suitable for:

8210082100-xp

Table of Contents