Touch Tone; Touch Tone Configuration; Ring Tones; Custom Ringtone Limit - Yealink SIP-T5 Series Administrator's Manual

Touch Tone

If you enable touch tone and tap the keys (except the off-hook key), the phone will produce a sound when it is not
on the dialing/pre-dialing screen and not in a call.
It is only applicable to CP920 phones.
Topic

Touch Tone Configuration

Touch Tone Configuration
The following table lists the parameter you can use to configure the touch tone.
Parameter features.touch_tone
Description It enables or disables the touch tone.
0-Disabled
Permitted
1-Enabled, when you tap the keys (except the Off-hook key), the phone will produce a sound when it
Values
is not on the dialing/pre-dialing screen and not in a call.
Default 1
Supported
CP920
Devices
Web UI Features > Audio > Touch Tone

Ring Tones

Ring tones are used to play for incoming calls. You can select a built-in ring tone or a custom ring tone for the
phone system or specific line registration. To set the custom ring tones, you need to upload the custom ring tones to
the IP phone in advance.
You can also specify a period of time after which the phone will stop ringing if the call is not answered.
Topics

Custom Ringtone Limit

Ringtone Configuration
Custom Ringtone Limit
The ring tone format must meet the following:
Phone Model
T57W/T54W/T48U/T48S/T46U/T46S
T48G/T46G/T29G
T53W/T53/T43U/T42U/T42S/T41S/T42G/T41P/T40P/T40G
/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920
Note : The ring tone file must be in PCMU/PCMA audio format, mono channel, 8K sample rate, and 16-bit resolution.
<y0000000000xx>.cfg
Format
.wav <=8MB
<=8MB (2.4MB of space should be
.wav
reserved for the phone)
.wav <=100KB
Audio Features
Single File Size
148