Toyota FJ CRUISER Owner's Manual page 272

Switching the display
Press
Each time the button is pressed, the display changes in the following
order: Folder no./File no./Elapsed time  Folder name  File name 
Album title (MP3 only)  Track title  Artist name
CD player protection feature
■
To protect the internal components, playback is automatically stopped when
a problem is detected.
Display
■
Up to 12 characters can be displayed at a time.
If there are 13 or more characters, pressing and holding
1 second or more enables to display the remaining characters.
A maximum of 24 characters can be displayed.
If or
operated for more than 6 seconds, the display will return to the first 12 char-
acters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
When "ERROR", "WAIT" or "NO MUSIC" is shown on the display
■
"ERROR":
"WAIT":
"NO MUSIC": This indicates that an MP3/WMA file is not included in the CD.
FJCRUISER_OM_General_OM35B53W
or .
is pressed for more than 1 second again or has not been
This indicates a problem either in the CD or inside the player.
The CD may be dirty, damaged, or inserted up-side down.
This indicates that operation is stopped due to a high tem-
perature inside the player. Wait for a while and then press
or . If the CD still cannot be played back, con-
tact your Toyota dealer.
3-2. Using the audio system
or for
271
3