Enco Control Technical Description page 11

2.7. Reboot
1. Off
2. On
Restart the device if there is no communication with the outside server for
time:
Reboot per. DHW
1440
Yes No
Using this port, it is possible to find the device's on the local network, without knowing its IP
address:
UDP hello DHW
37770
Yes No
3.
3. Modules
1. Module - - -
2. Module - - -
3. Module - - -
4. Module - - -
5. Module - - -
6. Module - - -
7. Enable connect On
8. Connect. type Ethr
9. Connect prt 37777
10.Remote enable Off
11.IP 192.168.0.211
12.Remote port 37775
13.Connect per. 3600
Select the required device type:
3.1. Module
1. Type - - -
Select type of communication interface:
•
Kulautuvos g. 45a , LT-47190 Kaunas
communication channel (port) for configuration of device via network.
settings for reading external devices (meters):
3.1.1. Module
1. - - -
2. SKS-3
3. SKM-1-M
4. SKM-01M
5. SKU01
6. SKU01SF
7. SKU01M
8. M-BUS
9. HEAT SYS
10.MODBUS R
11.MODBUS
12.SR-1K
•
Tel. (+370 37) 360234
3.1. Module
1. Type SKS-3
2. State On
3. Ext. port Off
4. Interf. Mbus[0]
5. Baud rate 9600
6. Parity Even
7. Array 0
8. Addr|ID 254
9. Period 3600
10.Module date
•
Faks. (+370 37) 360358
ENCO Control
Technical description
a specified
• •
info@axis.lt www.axis.lt
period of
11