Electrical Data [X1], [X3] - Festo CMMS-AS G2-STO Series Manual

A Technical appendix
A.1.3

Electrical data [X1], [X3]

Control ports DIN4, DIN5 [X1.21, X1.9]
Nominal voltage
Voltage range
Nominal current
Input voltage threshold
Switching on
Switching off
Switching time from high to low [ms]
Switching time from low to high [ms]
Maximum test impulse length
Tab. A.5 Technical data: Electrical data for the inputs at [X1]
Control port Rel [X3.2]
Nominal voltage
Voltage range
Nominal current
Input voltage threshold
Switching on
Switching off
Switching time from high to low [ms]
Switching time from low to high [ms]
Maximum test impulse length
Service life of relay input, switching cycles n
CMMS-AS-...-G2 Rev. 01
CMMS-AS-...-G2 Rev. 02
Tab. A.6 Technical data: electrical data of the control port Rel [X3]
Acknowledgment contact NC1, NC2 [X3.5, X3.6]
Feature
Max. voltage
Nominal current
Switching time closing
Switching time opening
Service life of acknowledgment contact, switching cycles n
the service life is reduced with higher load currents)
CMMS-AS-...-G2 Rev. 01
CMMS-AS-...-G2 Rev. 02
Tab. A.6
1) Switching time
Tab. A.7 Technical data: electrical data of the acknowledgment contact NC1/NC2 [X3]
38
[V] 24 (related to 0 V)
[V] 19.2 ... 28.8
[mA] 2.5 (typical; maximum 3)
[V] 13.1
[V] 3.4
5
8
[µs] Not specified; no tolerance against test impulses
[V] 24 (related to 0V)
[V] 19.2 ... 28.8
[mA] 20 (typical; maximum 30)
[V] 17.9
[V] 2.5
12
20
[µs] Not specified; no tolerance against test impulses
op
[n ] 100 000
op
6
[n ] 10 x 10
op
Relay contact, normally closed
[V DC] 30
[mA] 2000 at 30 V
[ms] (Switching time from high to low
[ms] (Switching time from low to high
[n ] 100 000
op
6
[n ] 10 x 10
op
Festo – GDCP-CMMS-AS-G2-S1-EN – 1306NH – English
1)
+ 9 ms)
1)
+ 9 ms)
(at 24 V and I
op Contact
= 10 mA;