Installation; Unpacking And Setting Up The Printer - Avery Dennison AP5.4 User Manual

05/10 Version 5.05-00

Installation

Unpacking and setting up the printer

[1] AP 5.4 in the original packaging.
1. Remove all loose objects from the shipping box.
2. Carefully lift the printer out of the box together with the styrofoam packag-
3. Remove the styrofoam and plastic film from the printer.
4. Place the printer on a flat surface.
5. Open the front cover. Remove the styrofoam shipping lock from the print-
6. Check that the shipment is complete, see
USER MANUAL
AP5.4 – AP5.6
WARNING!
Lethal hazard from mains power!
Only use the device in enclosed rooms under normal ambient conditions
(office atmosphere)!
CAUTION!
To avoid damage to the printer, observe the following:
Do not lift the printer using the plastic components on the front and rear.
To lift the printer, do not reach below the front hood.
ing.
Have a second person hold the box tightly.
Store the original packaging for possible shipping at a later date!
To carry the printer, reach below the baseplate at the front and rear.
head.
page 3.
Commissioning and Operation
Checking the shipment
2
on