Related Manuals for SHAREBOT 42
Summary of Contents for SHAREBOT 42
- Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Sharebot 42 (S42N1R) o cerca il tuo prodotto tra le migliori offerte di Stampanti Sharebot-42 Quick Start Guide...
-
Page 2: Table Of Contents
Safety guidelines..........................4 Extruder............................4 Heated printing plate........................4 Personal protective equipment......................4 Moving parts............................4 Package contents..........................5 Welcome Kit............................5 Sharebot toolbox..........................5 Test material.............................5 Working with your Sharebot 42......................6 Extruder unpack..........................6 Insert filament into the extruder.......................6 The first object..........................6 Machine............................7 The display............................8 Home..............................8 Print..............................8 Settings.............................9 Prepare............................9... -
Page 3: Your New Sharebot 42
Your new Sharebot 42 Sharebot 42 introduces a lot of new features compared to the product base on FFF technology previously made by Sharebot srl: • Printing area 250X220X200 mm • New magnetic printing support, with metal plate • New extruder with interchangeable nozzle •... -
Page 4: Safety Guidelines
Safety guidelines Extruder In FFF technology 3D printers, the thermoplastic filament is melted in the nozzle (the terminal part of the extruder) at a temperature varying between 190 and 280°C. During the printing process you mustn't touch the nozzle with hands. The contact even for a very short time causes burns. -
Page 5: Package Contents
The test material is guaranteed by Sharebot srl. Spoon from other suppliers can be used under the fully responsibility of the end user. Any damage to the machine coming from the use of a filament not certified by Sharebot will lead to a lack of warranty. -
Page 6: Working With Your Sharebot 42
Working with your Sharebot 42 Before starting to use your printer it is necessary to: – place the machine in a wide and appropriate area; – connect the power cable C13 - IEC 60320 into the socket on the side of the machine;... -
Page 7: Machine
Machine The machine is delivered calibrated and ready to use (Plug and Play). The plate is the surface on which the object production will take place . Sharebot 42 print area is about: X axis 250 mm Y axis 220 mm Z axis 200 mm ©... -
Page 8: The Display
Use the “Resume” command to let the printing process restart. Do not press the “Resume” button until the machine has stopped. You can return to the “Main screen” pressing the Sharebot icon usually available in the upper left corner of the screen. -
Page 9: Settings
(* .gcode, .gco *) extensions. To load a print file in Sharebot 42, you can use the USB port, located in the front of the machine. In this case the machine copies the file into his internal memory before starting the printing process, so that you can remove the USB stick without interrupting it. -
Page 10: Tune
Calibrate bed man Activating the manual calibration process, for a mechanical flatness of the printing plate Enable Filament Detection Enabling the sensor of the filament motion Disable Filament Detection Disabling the filament motion sensor Tune COMMAND FUNCTION Speed Speed variation of all print parameters (percentage) Variation of the temperature of the heated floor Change filament... -
Page 11: Changing The "Probe Offset
SW Reset Switching off the functionality of the machine and reset the firmware to factory conditions Statistics Display the data related to total and partial worked hours. The partial data are resettable. © 2016 Sharebot S.r.l. - All rights reserved... -
Page 13: Network Configuration
Network configuration Sharebot 42 can be configured as a network client by assigning a static or dynamic IP address (via DHCP). Sharebot42 is accessible via browser in order to manage some features. For network configuration is recommended the intervention of the administrator of your company network. -
Page 14: Dashboard
Dashboard The Dashboard is the first page loaded when accessing the machine via a web browser: The Dashboard displays the main information of the running process: – A: machine status, the “Online” label means that all is working correctly and the next label “Printing”... - Page 15 ( .gcode ); – delete a file from the internal memory (G); – start a new printing process (F) using a file from the internal memory; © 2016 Sharebot S.r.l. - All rights reserved...
-
Page 16: Warranty
The spare parts are available for five years from the date of placing the machine on the market For every need of spare parts, please contact the authorized centres Sharebot or use the dedicated form on the website sharebot.it . -
Page 17: Resources
The network is rich in resources concerning three-dimensional modelling, creative projects, unpublished tips and solutions to work smarter. You can take something from these resources, but Sharebot srl disclaims any liability on the procedures or contents on sites unrelated to the company.
Need help?
Do you have a question about the 42 and is the answer not in the manual?
Questions and answers