Appendix; General Error Codes (Error Messages) - SEW-Eurodrive MOVIDRIVE MDX61B Manual

7

Appendix

7.1

General error codes (error messages)

General error
code (hex)
00 - 01
02
03 - 07
08
09
0A
0B
0C
0D
0E
0F
10
11
12
13
14
15
16
17
18
19
1A - 1E
1F
20
21 - CF
D0 - DF
Manual – MOVIDRIVE® MDX61B DFD11B Fieldbus Interface DeviceNet
General error codes (error messages)
Error name Description
Reserved for DeviceNet
Resource unavailable The source required for performing the service is unavailable
Reserved for DeviceNet
Service not supported The service is not supported for the selected class/instance
Invalid attribute value Invalid attribute data have been sent
Reserved for DeviceNet
Already in requested The selected object is already in the requested mode/state
mode/state
Object state conflict The selected object cannot perform the service in its current
status
Reserved for DeviceNet
Attribute not settable It is not possible to access the selected object for writing.
Pivilege violation Violation of access entitlement
Device state conflict The current status of the device makes it impossible to perform
the required service
Reply data too large The length of the transmitted data is longer than the size of the
receive buffer
Reserved for DeviceNet
Not enough data The length of the transferred data is too short for the service to
be performed
Attribute not supported The selected attribute is not supported
Too much data The length of the transferred data is too long for the service to
be performed
Object does not exist The selected object is not implemented in the device
Reserved for DeviceNet
No stored attribute data The requested data have not been stored previously
Store operation failure The data could not be stored because an error occurred while
saving them
Reserved for DeviceNet
Vendor specific error Vendor specific error (→Manual"SEW Fieldbus Device Profile")
invalid parameter Invalid parameter
This error message is used when a parameter does not satisfy
the requirements of the specification and/or the requirements of
the application.
Future extensions Reserved by DeviceNet for additional definitions
Reserved for Object Use this area if an occurring error cannot be entered in one of
Class and service the error groups listed above.
errors
Appendix
7
41