Sealey SA206 Instructions

thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instructions
1. Safety
‰
Warning! ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this equipment.
‰
Warning! disconnect the equipment from the air supply before changing accessories, servicing or performing any maintenance.
9
Keep the equipment clean and maintain it in good condition (use an authorised service agent).
9
replace or repair damaged parts. use genuine parts only. unauthorised parts may be dangerous and will invalidate the warranty.
‰
Warning! ensure that the correct air pressure is maintained and not exceeded.
9
Keep air hoses away from heat, oil and sharp edges. check hoses for wear before each use and ensure that all connections are secure.
8
Do not direct air from the air hose at yourself, others or animals.
9
drain the compressor air tank daily. Water in the air line will damage your equipment.
9
When work is complete ensure that the air supply is turned off.
2. introDuction
suitable for industrial workshop air supply set-ups where high volume applications are required. regulator assemblies feature locking control
knob for pre-setting air pressure and large easy-to-read pressure gauge. filters available with manual or auto drain facility with female
1/8"BsP outlet. lubricator includes oil/air mix control and sight glass. filter and lubricator are fitted with metal bowl cages for protection.
sA206, sA206fr, sA206frAd and sA206r supplied with mounting bracket.
3. Specification
Sa206
Sa206fr & Sa206fraD
filter/lubricator/regulator - Sa206
max. inlet pressure . . . . . . . . . . . . . . . . . . . . 150psi (10.3 bar)
max. outlet pressure . . . . . . . . . . . . . . . . . . . . 125psi (8.6 bar)
max. flow rate @ 100psi (6.9 bar) . . . . . . . . . . . . . . . .105cfm
filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 micron
lubricant . . . . . . . .sealey Air tool oil - Ato/500 or Ato/1000
Ports-inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2"BsP
outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2"BsP
Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4"BsP
© Jack sealey limited
instructions for
air regulator, filter, lubricator range
Sa206, Sa206fr, Sa206f, Sa206l
model no:
Sa206r, Sa206fraD, Sa206faD
Sa206l
Original Language Version
Sa206f & Sa206faD
lubricator - Sa206l
max. inlet pressure . . . . . . . . . . . . . . . . . . . . 150psi (10.3 bar)
max. outlet pressure . . . . . . . . . . . . . . . . . . . . 125psi (8.6 bar)
max. flow rate @ 100psi (6.9 bar) . . . . . . . . . . . . . . . .175cfm
lubricant . . . . . . . .sealey Air tool oil - Ato/500 or Ato/1000
Ports-inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2"BsP
outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2"BsP
sA206/206fr/206f/206l/206r/206fAd/206frAd | issue 4 04/05/17
Sa206r