Samsung GALAXY S6 Edge Replacement Manual page 3

2
Easy2Fix – Replacement Guide
Step 1
Place the phone down
Step 2
Need to use a blow dryer/hair dryer
to reheat the adhesive glued at the
back of rear panel of the phone. So
once that is done, the adhesive
should be melted and unstruck with
the phone
Once the above action is taken,
need to carefully slip in the plastic
pick in between the rear panel and
the phone assembly
Step 3
Slip around the edge by using the
plastic pick to remove the adhesive
away from the rear panel
*Need to pay extra attention and
slip the pick because if put too
much physical force, the panel may
crack by accident