Jet 668197 Installation Manual

IN THE BOX
The pump is designed to collect condensate water from air
conditioning machines and discharge it up to recommended
maximum 5 metres head. The internal safety float is a low current
switch to stop the air conditioning system in the event of pump
failure. The pump is operated from an internal float switch.
Information correct at the time of going to press.
AC Condensate Pump - Installation Guide
Twist & click
non-return valve
with retainer clip
ELECTRICAL WARNING!
Isolate before working on this unit.
Service Guide:
Flush the pump through with anti-bacterial wash every six months
to avoid sludge build-up in the pump housing.
NB The contractors should satisfy themselves that any chemicals
used are compatible with the working of the pump.
IMPORTANT:
Pump should be filled with water until motor runs, check for leaks
and proper discharge of water.
Ensure that there are no kinks or trapped parts in the piping,
which must have an inside diameter of 6mm. Fix the pipe with
cable ties to the pump outlet.
IMPORTANT:
The pre-wired safety switch MUST ALWAYS be utilised.
1
668197