Toro Greensmaster Flex 21 Installation Instructions page 2

9. Disconnect the throttle cable (Fig. 4) from the throttle
lever assembly as follows:
A. Unsnap the cable housing from the control bracket.
B. Unhook the cable end from the throttle lever.
2
1
Figure 4
1. Throttle control cable
10. Disconnect the traction cable (Fig. 5) from the traction
lever assembly as follows:
A. Loosen one of the jam nuts securing the cable to
the gear box and remove the cable from the slot.
B. Remove the retaining ring that secures the traction
cable housing to the control bracket.
C. Remove the retaining ring that secures the cable
spring to the pin on the traction lever.
D. Remove the cable from the traction lever assembly.
11. Disconnect the reel control cable (Fig. 5) from the reel
control lever as follows:
A. Loosen one of the jam nuts securing the cable to
the gear box and remove the cable from the slot.
B. Remove the retaining ring that secures the reel
control cable housing to the control bracket.
C. Unhook the reel control cable spring from the reel
control lever.
2. Throttle lever
Figure 5
1. Traction cable
2. Retaining ring
3. Traction lever pin
12. Remove the two screws, spacers and nuts securing the
proximity switch to the control bracket (Fig. 6). Move
the switch away from the bracket.
Figure 6
1. Proximity switch
2
3
5
2
4
1
4. Reel control cable
5. Reel control lever
1