gofanco 4x4 HDMI Matrix 4K User Manual
  1. Manuals
  2. Brands
  3. gofanco Manuals
  4. Matrix Switcher
  5. 4x4 HDMI Matrix 4K
  6. User manual

gofanco 4x4 HDMI Matrix 4K User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
4x4 HDMI Matrix 4K
User's Guide
P/N:Matrix44-HD20
G4-0065A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4x4 HDMI Matrix 4K and is the answer not in the manual?

Questions and answers

Related Manuals for gofanco 4x4 HDMI Matrix 4K

Summary of Contents for gofanco 4x4 HDMI Matrix 4K

  • Page 1 4x4 HDMI Matrix 4K User's Guide P/N:Matrix44-HD20 G4-0065A...

  • Page 2: Important Safety Notices

    Thank you for purchasing from gofanco. Our products aim to meet all your connectivity needs wherever you go. For optimum performance and safety, please read the instructions carefully and keep this User's Guide for future reference. If you need more information about our products, please visit www.gofanco.com.

  • Page 3: Installation Requirements

    Introduction The 4x4 HDBaseT Matrix 4K allows you to select and switch between any of the 4 HDMI source devices to display on any of the 4 HDMI outputs. Features • Compliant with HDMI 2.0 and HDCP 2.2 specifications • Bandwidth up to 18Gbps •...

  • Page 4: Package Contents

    Package Contents 1x 4x4 HDMI Matrix 4K • 1x Mounting kit • 1x IR remote control • 1x IR Receiver cable • 1x Software CD • 1x Phoenix plug for RS232 control • 1x Power adapter (5VDC) • 1x User's guide •...
  • Page 5 Figure 2: Rear Panel Layout Name Description S/PDIF Out (1-4) S/PDIF audio output connectors Connects to the included IR IR Receiver Receiver cable, receives signals from the included remote control Connects to PC for RS232 software RS232 control or firmware update Firmware update RJ45 Control IP network control...

  • Page 6: Hardware Installation

    Hardware Installation Power off all devices including your HDMI source(s) and HDMI display(s). Connect your HDMI source devices to the Matrix 4K's HDMI Input connectors with HDMI cables (HDMI cables not included). Connect your HDMI displays to the Matrix 4K's HDMI Output connectors with HDMI cables (HDMI cables not included).

  • Page 7: Application Diagram

    Application Diagram The application diagram shows the most typical input and output devices used with the 4x4 HDMI Matrix 4K. Figure 3: Application Diagram...
  • Page 8 Matrix Device Control Remote Control Users can control the 4x4 HDMI Matrix 4K using the included IR remote. Point the remote control towards the built-in IR receiver window located on the front panel. An optional IR receiver cable is included to improve IR function in space constrained installations.
  • Page 9 RS232 Control Connect the 4x4 HDMI Matrix 4K to a PC using an RS232 cable. RS232 Pin Assignment Software Control Open the software on the included software CD and the control window appears as shown below. In COM Setting, select the PC's COM port and click...
  • Page 10 EDID Config Allows you to read and configure the EDID for each input. IP Config Allows you to read and configure the IP address. Select DHCP if you want the DHCP server to assign an IP address automatically.
  • Page 11 Net Config Allows you to configure the PC and Matrix in the same LAN and subnet. An option is to click IE to enter the browser.
  • Page 12 System Config Allows you to power On/Off, reset, and return the Matrix to its default settings.

  • Page 13: Command Control

    Command Control Open CommUart Assistant on the software CD. COM Port Setting Port Command Window Enter the port command and click Send.
  • Page 14 Commands Select HDMI Input to HDMI Output...
  • Page 15 EDID Setting...

  • Page 16: Web Control

    Web Control Default IP Address The default IP address of the Matrix 4K is 192.168.1.168. Change the IP address of our PC Connect the Matrix 44 and your PC to the LAN. Configure you PC as follows: 1. Click Start / Control Panel / Network and Sharing Center.
  • Page 17 Click Properties. Select Use the following IP Address, and then enter the IP address. Note: You can use any IP address in the range: 192.168.1.2 to 192.168.1.254 (excluding 192.168.1.168). Click OK to save the changes. Click Close to exit.
  • Page 18 Web Browser Control Open your web browser and enter the Matrix 4K's IP address 192.168.1.168 into the address bar, and press Enter. Port Setting Assign any of the input devices to any of the outputs.
  • Page 19 EDID Config Set the EDID for the HDMI Inputs. IP Config Enter the network setting, and enable DHCP.

  • Page 20: Firmware Update

    Firmware Update Connect the Matrix 4K to the PC using either the USB port or RS232 port. Open the update software on the CD. Click Search, choose the COM port of the PC, then click Connect. When you see S3RC, click Load FW File to load the firmware.

  • Page 21: Specifications

    Specifications Operating Temperature 23° to 113° F (-5° to 45° C) Storage Temperature -4° to 140° F (-20° to 60° C) 480p@60Hz, 576p@50Hz, 720p@60hz, 1080p@24Hz, 1080p@50Hz, Resolution 1080p@60Hz, 4K@24Hz, 4K@30Hz, 4K@60Hz YUV 4:2:0, 4K@60Hz YUV 4:4:4 HDCP Compliance HDCP 2.2 and HDCP 1.4 Output Video HDMI 2.0 and HDMI 1.4 PCM, Dolby 5.1/7.1, DTS 5.1/7.1 digital...
  • Page 22 Blank Page...
  • Page 23 Disclaimer The product name and brand name may be registered trademarks of related manufacturers. TM and ® may be omitted on the user's guide. The pictures on the user's guide are just for reference, and there may be some slight differences with the actual products.
  • Page 24 Thank you for choosing gofanco www.gofanco.com...

This manual is also suitable for:

Matrix44-hd20

Table of Contents