EO Mini Pro 2 Installation & User Manual

Hide thumbs Also See for Mini Pro 2:

User manual (23 pages)

Table Of Contents

Quick Links

EO Mini Pro 2 Installation & User Guide

EO Mini Pro 2

Installation &

User Guide.

Table of Contents

Need help?

Do you have a question about the Mini Pro 2 and is the answer not in the manual?

Questions and answers

Summary of Contents for EO Mini Pro 2

Page 2: Table Of Contents
2.0 Pre-Installation (p3) 3.0 Installation Instructions for the EO Mini Pro 2 (p5) 4.0 Connecting the EO Mini Pro 2 to the EO Cloud (p10) 5.0 Connect the EO Mini Pro 2 to the Wi-Fi (p15) 6.0 Additional EO Mini Pro 2 Installation Information (p18) 7.0 How to use the EO Mini Pro 2 (p23)
Page 3: Introduction (P2)
EO Mini Pro 2 Installation & User Guide Introduction Your EO Mini Pro 2 MUST be installed by an EO Approved Installer. In accordance with the “IET Code of Practice for Electric Vehicle Charging Equipment Installation” and local regulations. Instructions include: How to mount and wire up the EO Mini Pro 2.
Page 5 If a weak Wi-Fi signal is present then there is a chance that the installation of the EO Mini Pro 2 may fail. In order to check that the Wi-Fi signal is strong enough please complete the following steps: Download the “Wi-Fi SweetSpots”...
Page 6: Installation Instructions For The Eo Mini Pro 2 (P5)
EO Mini Pro 2 Installation & User Guide Installation Instructions for the EO Mini Pro 2. © EO Charging 2020...
Page 7 EO Mini Pro 2 Installation & User Guide 3.01 3.02 3.03 Physical installation Drill the correct size hole in Offer the back plate of the EO Remove the EO Mini Pro 2 instructions. the bottom of the EO Mini Mini Pro 2 up to the installation from the packaging.
Page 8 EO Mini Pro 2 Installation & User Guide 3.04 3.05 3.06 3.07 Clean out the EO Mini Pro 2 Use the rotary switch on the Strip and prepare the power Mount the CT Clamps around base for dust and attach the EO EO Mini Pro 2 to select the cable –...
Page 9 Load Management - White CT1 (Left) Right Load Management - Black Left DO NOT USE 3.08 Connect the other end of the CT Clamp to the EO Mini Base. Right DO NOT USE Left Solar - White Right Solar - Black...
Page 10 (three pin plug) from the front of front plate to the EO Mini Pro 2 the EO Mini Pro 2 to the back of back plate, making sure that no the EO Mini Pro 2. cables are trapped. Secure the EO Mini Pro 2 front plate to the EO Mini Pro 2 back plate.
Page 11: Connecting The Eo Mini Pro 2 To The Eo Cloud (P10)
EO Mini Pro 2 Installation & User Guide Connecting the EO Mini Pro 2 to the EO Cloud. © EO Charging 2020...
Page 12 Home app. Installer Using the app, connect to the Wi-Fi hotspot created by the EO Mini Pro 2 and enter site details such as Solar, ALM and site capacity. The process for connecting the EO Mini Pro 2 can be...
Page 13 EO Mini Pro 2 Installation & User Guide Creating an Log into the EO Smart Home Accept both the Terms and Install the EO Smart Home app account. app. If you do not have an Conditions and Privacy Policy. onto your mobile device.
Page 14 EO Mini Pro 2 Installation & User Guide Installer - Click “Start Installation” and If successful then the installer Select “Begin Installation” from Check the EO the app shall ask the installer will be able to configure the the left hand menu if the above...
Page 15 EO Mini Pro 2 Installation & User Guide At this point the Installer’s The app will now connect to the section is complete and the EO Mini Pro 2, send down the homeowner now needs to above settings and then perform complete the set up with the a connectivity test.
Page 16: Connect The Eo Mini Pro 2 To The Wi-Fi (P15)
EO Mini Pro 2 Installation & User Guide Connect the EO Mini Pro 2 to the Wi-Fi. © EO Charging 2020...
Page 17 EO Mini Pro 2 Installation & User Guide Connect the Select the Vehicle from the Enter the site address. The homeowner needs to log EO Mini Pro 2 database. into their version of the app. to the Wi-Fi. If the following screen is not shown then select “My EO...
Page 18 EO Mini Pro 2 Installation & User Guide The EO Mini Pro shall now join Click “Start Installation” and the The app shall now scan for any the homeowner’s Wi-Fi and app shall ask the homeowner available Wi-Fi networks and...
Page 20 EO Mini Pro 2 Installation & User Guide Important Installation Information The installer must select Characteristics of power the Earthing and RCD Permanently connected to 230V AC supply. supply input configuration in accordance with local regulation & best Characteristics of power Supplies 230V AC to the vehicle.
Page 21 EO Mini Pro 2 Installation & User Guide Wiring Connections. Markings on the Mini Pro 2 The following wiring Wiring Earth Jumper connections are possible: System Live Earth Neutral 6.2.1 Single Phase TN Networks. By default the Earth Jumper is...
Page 22 EO Mini Pro 2 Installation & User Guide 6.2.2 Single Phase Markings on the Mini Pro 2 IT networks (e.g. Norway). Wiring Earth Jumper System For markets that with an IT Live Earth Neutral network, then the Earth Jumper must be removed. Removing...
Page 23 Rotary Switch Position Maximum Current of the EO Mini (Amps) Maximum Current. 0A - Off - Default It is possible to change the maximum current rating of the EO Mini Pro 2 by using the rotary switch. © EO Charging 2020...
Page 24: How To Use The Eo Mini Pro 2 (P23)
EO Mini Pro 2 Installation & User Guide How to use the EO Mini Pro 2. The following sections detail the user instructions on how to use the EO Mini Pro 2 and the EO Smart Home app. © EO Charging 2020...
Page 25 EO Mini Pro 2. from dirt and other contaminates. Plug the charging cable into vehicle. Plug the charging cable into EO Mini Pro 2 (not applicable if a tethered unit is installed). The Vehicle should start to charge immediately or will charge at the scheduled time.
Page 27 EO Mini Pro 2 Installation & User Guide The colour of the LED should be interpreted as follows: Power Up. Normal Operation. When the unit is powered up the following sequence should be observed: LED Colour State Notes LED Colour...
Page 28 EO Mini Pro 2 Installation & User Guide Fault Conditions. The EO Mini Pro 2 can detect certain fault conditions and when a fault condition The LED is latching. This means that as soon as a fault is detected, then the fault is detected then the LED flashes RED a certain number of times to indicate the code is displayed on the LED until the end of the charging session.
Page 29: Troubleshooting Guide (P28)
EO Mini Pro 2 Installation & User Guide Troubleshooting Guide. © EO Charging 2020...
Page 30 Verify that the vehicle is capable of being woken up by a change in the control pilot signal (contact vehicle manufacturer for confirmation). I get an error code on the app: If you receive an error code then please note it down and contact EO Support who would be happy to help. © EO Charging 2020...
Page 31: Further Technical Support (P30)
EO Mini Pro 2 Installation & User Guide 10.0 Further Technical Support. © EO Charging 2020...
Page 32 EO Mini Pro 2 Installation & User Guide All EO Charging technical documentation is published in the EO Resource Centre, this is found at: www.eocharging.com/resource-centre The EO Support team can be reached at: support@eocharging.com +44 (0) 333 77 20383 © EO Charging 2020...

EO Mini Pro 2 Installation & User Manual

Quick Links

Need help?

Questions and answers

Related Manuals for EO Mini Pro 2

Summary of Contents for EO Mini Pro 2