ViziT M430C Manual

VIZIT- M430C is a colour monitor intended for use in videodoorphones VIZIT of 300 and 400 series.
Colour 2.5" TFT LCD
Operation with a doorstation camera and additional camera
Operation with two doorstations connected via commutator BKM-440
Door unlocking during a call or intercom
Entrance / apartment door zone videomonitoring
Apartment doorstation activation
Ringer volume, brightness, contrast and colour adjustment
LED indication of operating modes
Screen
Colour system
Video input:
- impedance, Ohm
- voltage, V, ð-ð
Operating voltage, VDC
Max. power consumption, W
Dimensions, mm
Weight, kg
Ambient temperature range:
Relative humidity of air:
Monitor VIZIT-M430C
Mounting kit
Operating instruction
Package
The monitor does not contain voltage above 27V. To avoid damage or electric shock do not perform
any connections or repair when the power is on!
Fix the monitor on a wall observing mounting dimensions on Figure 1.
Use the screws and concrete inserts supplied.
Terminals layout is shown on Figure 2.
For terminals and circuits destination refer to Table 1.
Connect the cables as shown on the connection diagram examples on Figures 3 - 6.
Requirements for the cables for Figures 3, 6 are given in the doorstation operating instruction and for
Figures 4, 5 in BKM-440 operating instruction.
FEATURES
SPECIFICATIONS
OPERATING CONDITIONS
PARTS LIST
SAFETY INSTRUCTIONS
INSTALLATION
2.5" / 63 mm TFT LCD
PAL
470
0.5...2
15...27
4
79(W)x265(H)x51(D)
0.5
from + 5 to + 40 °C;
up to 93% at 25 °C.
1pc.
1pc.
1pc.
1pc.
VIZIT-M430C