Table of Contents
Advertisement
Priority & VLAN
The Priority & VLAN feature allows you to control sending and receiving
tagged frames of QoS and VLAN.
When the property is set to Priority & VLAN Enabled, the adapter sends
and receives QoS and VLAN tagged frames; with Priority Enabled, the
adapter sends and receives QoS tagged frames; with VLAN Enabled,
the adapter sends and receives VLAN tagged frames. To assign a VLAN
ID to the adapter, see "VLAN ID" on page 94.
To enable or disable the Priority & VLAN feature, do the following:
1. Access the Advanced Properties.
See "Accessing Advanced Properties" on page 58.
2. Select Priority & VLAN in the Property box.
The Priority & VLAN page is displayed as shown in Figure 39.
Figure 39. Priority & VLAN Page
3. Select one of the following options:
Priority & VLAN Enabled — Allows for packet
prioritization and VLAN tagging. This is the default
setting.
DNC10 Series Network Interface Cards Installation and User's Guide
81
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the DNC10 Series and is the answer not in the manual?
Questions and answers