Advertisement
Quick Links
Installing The USA Technologies Cashless Solution
into TouchTunes Entertainment Systems
ePort G9 Card Reader
This Installation Guide should be used to install the USA Technologies ePort
G9 into all of the designated Touch Tunes Entertainment systems. Please re-
view this document to identify which entertainment system will be modifi ed,
and to familiarize yourself with the installation processes.
11/32" Socket
1/4" Socket
12" Extension
Ratchet
USA TECHNOLOGIES
TOOLS REQUIRED FOR INSTALLATION
Phillips Screwdriver
Wire Cutters
Power Drill*
3/16" & 3/8" Drill Bit*
#VXXUDTUN1900
ePort G9 Telemeter
Multi-diameter Step Drill Bit,
1/4"-3/4"*
Advertisement
Related Manuals for USA Technologies ePort G9 Card Reader
Summary of Contents for USA Technologies ePort G9 Card Reader
- Page 1 G9 Card Reader ePort G9 Telemeter This Installation Guide should be used to install the USA Technologies ePort G9 into all of the designated Touch Tunes Entertainment systems. Please re- view this document to identify which entertainment system will be modifi ed, and to familiarize yourself with the installation processes.
-
Page 2: Installation Procedures
However, each kit has specific cable(s) required to interface the ePort to the spe- cific machine you are modifying. Please use the tables and illustrations below to ensure you have the correct material in the kit that was shipped to you by USA Technologies. CABLES TO INTERFACE TO MX-1 MACHINES... - Page 3 CABLES TO INTERFACE TO ALLEGRO AND OVATION I MACHINES WITHOUT COIN ACCEPTOR WITH COIN ACCEPTOR Kit: #VVVUTTUN1233 Kit: #VVWUTTUN1233 ePort Interface Cable: #VXXUC0101303 ePort Interface Cable: #VXXUC0101303 Machine Interface Cable: #300987-006 USAT adapter 3: #300986 CABLES TO INTERFACE TO VIRTUO AND OVATION II MACHINES WITHOUT COIN ACCEPTOR WITH COIN ACCEPTOR Kit: #VVVUTTUN1230...
- Page 4 6. Set the G9 Telemeter, card reader, and antenna off to the side. MOUNTING THE EPORT G9 CARD READER IN OVATION I AND OVATION II MACHINES ATTENTION: This kit requires a new Lexan cover for the front of the machine.
- Page 5 If there is no metal surface within reach, use the Velcro buttons supplied to mount to any surface. MOUNTING THE EPORT G9 CARD READER IN A PLAYDIUM MACHINE 1. Remove power from the system.
- Page 6 MOUNTING THE EPORT G9 CARD READER IN A MX-1 MACHINE ATTENTION: This kit requires a new Lexan cover for the front of the machine. FIG. 13 Please contact your TouchTunes Sales Rep at 1-847-419-3300. 1. Remove power from the entertainment system.
- Page 7 CONNECTING THE EPORT G9 TELEMETER TO THE CARD READER Antenna Below the “ANTENNA” designation on the label of the Tele- meter, is a round connector. Insert the round connector at the end of the antenna wire into this connector until it “clicks”.
- Page 8 Phone: 888.561.4748 FAX: 610.989.9695 Email: customersupport@usatech.com 3103 Phoenixville Pike Online Store: http://store.usatech.com Malvern, PA 19355 USA TECHNOLOGIES WEBSITE ADDRESSES Customer Website Login #VXXUDTUN1900 REV B https://usalive.usatech.com Company Site All contents © Copyright 2016 USA Technologies, Inc. http://www.usatech.com All rights reserved.
- Page 9 3/16'' 3/16'' CUT OUT 3/16'' 3/16'' 1/2'' DRILL TEMPLATE FOR USE WITH MACHINES WITH A COIN ACCEPTOR ART901008-001R01...
Need help?
Do you have a question about the ePort G9 Card Reader and is the answer not in the manual?
Questions and answers