Firmware Update - Bosch Conettix B465 Installation And Operation Manual

Conettix Universal Dual Path Communicator
* 1.
Diagnostic
2. Change
Passcode
3. Reset to
Factory
Defaults
4. Clear/
Reset Status
5. Firmware
Update
*
The Diagnostic parameter is used in troubleshooting communication issues with the B465.
Use of the Diagnostic parameter is to be used only at the direction of TECHNICAL
SUPPORT.
6.4

Firmware Update

You can update the B465 firmware through the USB interface and a communication program
such as Tera Term, or with RPS. For Tera Term installation instructions, refer to USB and
TeraTerm, page 37.
Bosch Security Systems, Inc.
1 Select this option to run various diagnostic procedures.
Available options include:
– Modify Diagnostic Settings. Use this option to determine
which type of messages display during diagnostics. This
option is for use only under Bosch direction. A sub-menu
of options includes:
– Receiver Communications Verbose Mode
– Cellular Modem Verbose Mode
– Network Communications Verbose Mode
– Network Operations Verbose Mode
– Input Power & Battery Verbose Mode
– Module Operations Verbose Mode
– All Verbose Modes Off
– Re-print Saved Console Message. Use this option to print
any diagnostic messages that have already occurred and
are stored in the B465's buffer. This can print what just
happened if an issue occurs.
– Enable Live Console Messages. Use this option to provide
real time output of diagnostic messages. This allows the
computer running TeraTerm to log what is occurring in
the module and can log for longer periods of time.
– LED/Sounder Test. Use this option to test the operation
of the piezo sounder.
– Communicator Test Menu. Use this option to test
communication paths between the B465 and the
connected receivers.
2 Select this option to change the passcode used to enter in the
USB menu. Enter a new passcode twice to change it. The
second entry confirms the new passcode. Passcodes must be
4-10 characters long, and are case-sensitive. 0-9, A-Z, a-z, and
special characters are allowed.
3 Select this option to reset all factory default values. All fields
are cleared and the factory default values are restored.
4 Select this option to reset the B465 status.
5 Select this option to update the B465 firmware.
For firmware update instructions, refer to Firmware Update,
page 53.
Installation and Operation Manual
Configuration and Diagnostics | en
2017.11 | 05 | F.01U.311.207
53