Advertisement
Quick Links
Please refer to the accessory and hardware list located on page 18 of the owner's manual for
1. Remove the base of the chair from box 1
of 2 and place in the desired location.
3. Plug the female end of the power cord
into the back base of the chair, then plug
the male end of the power cord into a surge
protector.
R.6 Massage Chair
Assembly Instructions
proper part names & reference images
2. Install the channel covers into the base of
the chair.
4. Turn on the main power switch. Note, the
chair will automatically incline. Once the
chair has fully inclined, turn off the main
power switch again.
Advertisement
Summary of Contents for OHCO R.6
- Page 1 R.6 Massage Chair Assembly Instructions Please refer to the accessory and hardware list located on page 18 of the owner’s manual for proper part names & reference images 1. Remove the base of the chair from box 1 2. Install the channel covers into the base of of 2 and place in the desired location.
- Page 2 R.6 Massage Chair Assembly Instructions 5. Remove the footrest from box 2 of 2. 6. Place the footrest near the front of the chair, Then, using the provided T-wrench, then connect the one electrical connector and remove the two 4mm cap head screws...
- Page 3 R.6 Massage Chair Assembly Instructions 9. Remove the right arm from box 2 of 10. Using the provided T-wrench, firmly secure the the 2. Then, align the arm’s connection arm to the chair by carefully installing the two 4mm cap...
- Page 4 R.6 Massage Chair Assembly Instructions 13. Install the remote control by connecting the female end, located on the end of the remote control’s cord, to the male end located on the left side of the seat on the base of the chair.
- Page 5 R.6 Massage Chair Assembly Instructions 15. Lay the seat pad down so it sits on the base of the chair. Then secure the back pad by completing the zipper connections on the left and right side of the chair’s back, and secure the seat pad by zipping it to the base of the chair.
Need help?
Do you have a question about the R.6 and is the answer not in the manual?
Questions and answers