Download Print this page
Qasair Harvey Norman HNE Series Installation Instructions & User Manual

Qasair Harvey Norman HNE Series Installation Instructions & User Manual

Undercupboard

Advertisement

Quick Links

Harvey Norman
HNE & HNR Undercupboard Rangehoods
Installation Instructions & User Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the Harvey Norman HNE Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Qasair Harvey Norman HNE Series

  • Page 1 Harvey Norman HNE & HNR Undercupboard Rangehoods Installation Instructions & User Guide...
  • Page 3 Do not reduce the duct size or have sharp bends. Enlarge the duct size if the duct is to run 6 metres or longer. Advice from Qasair is available to ensure optimum performance. Always use non-flammable materials to minimise the risk of fire in the duct at a later date.
  • Page 4 WARNING: Incorrect venting will result in additional noise and a reduction in efficiency. Exhaust air must not be discharged into any chimney or flue, which may carry combustible products from other sources. a) Do not discharge the air-flow from the rangehood into a flue used for exhausting fumes from burning gas or fuel;...
  • Page 5: Installation Instructions

    INSTALLATION INSTRUCTIONS Cupboard cutout size and Install options CUPBOARD BASE MODEL MOTOR BOX SIZE HOOD BASE SIZE CUT OUT SIZE MIN. HNR 60L-1 T 240 x 580mm 280 x 600mm 295 x 610mm 250 x 585mm HNR 90L-1 T 240 x 880mm 280 x 900mm 295 x 910mm 250 x 885mm...
  • Page 6 INSTALLATION INSTRUCTIONS For HNE Rangehoods For HNR Rangehoods 1. Loosen screws ‘A’ and ‘B’ by turning anti clockwise. 2. Turn screw ‘D’ anti-clockwise to extend the outer spring bracket. 3. Insert the rangehood into the cut out. Ensure spring brackets are positioned on top of cupboard base.
  • Page 10 RANGEHOOD CONTROLS & CLEANING RANGEHOOD CLEANING Qasair Rangehoods are made from stainless steel, either type 304 or type 316. * Type 304 is classified as 18/8 stainless steel * Type 316 is classified as 18/10 stainless steel This means that the stainless steel is made of 18% nickel and either 8% or 10% of chromium respectively.
  • Page 11 QASAIR Ducting...
  • Page 12 DUCTING 200∅ 117. DR-200 118. DR-200 CB 119. DR-200/45 Duct Length 200∅ Duct Length 200∅ Colourbond 200∅ bend 45° 120. DR-200/90 122. BD/WV-200 123. CH-200 200∅ bend 90° Back Draft Wall Vent 200∅ Chairman’s Hat 200∅ 127. BD/SQ-RC 200 142. FRC-200 SS 124.
  • Page 13 DUCTING 300∅ TR-200-300 216. DR-300 217. DR-300 CB Transition From Twin 200∅ to 300∅ Duct Length 300∅ Duct Length 300∅ Colourbond 218. DR-300/45 219. DR-300/90 232. CH-300 300∅ bend 45° 300∅ bend 90° Chairman’s Hat 300∅ 233. CH-300 CB 234. BD/SQ-RC 300 256.
  • Page 14 No other person, or firm or corporation is authorised by Condari to offer or give on its behalf any other greater warranty than that given by Condari under this warranty. Condari Pty Ltd provides to all QASAIR Rangehoods a 10 year motor replacement warranty. This is a change over warranty.
  • Page 15 CONDOR Rangehoods are designed to be used over all domestic barbecues available in AUSTRALIA. QASAIR Rangehoods are not to be used over barbecues approved for outdoor use only. Outdoor barbecues will have a rating plate on them specifying that they are approved for outdoor use only and also a mega joule rating per burner or a total mega joule rating.
  • Page 20 Distributed in Australia by Condari Pty Ltd. T 1300 360 563 Head office VIC T 03 9482 7088 F 03 9482 7011 Email: sales@qasair.com.au NSW / ACT T 02 9316 4599 F 02 9316 9299 Email: salesnsw@qasair.com.au T 07 3423 3503 F 07 3282 9122 Email: salesqld@qasair.com.au SA / NT T 1300 360 563 F 03 9482 7011 Email: salessa@qasair.com.au...