Vislink DVE6100 User Manual
  1. Manuals
  2. Brands
  3. Vislink Manuals
  4. Media Converter
  5. DVE6100
  6. User manual

Vislink DVE6100 User Manual

Uhd/hd/sd video encoder - modulator
Hide thumbs
Table of Contents

Advertisement

Quick Links

DVE6100
UHD/HD/SD Video
Encoder - Modulator
User Manual
Vislink, Waterside House, Earls Colne Business Park, Colchester, Essex, CO6 2NS, UK
Telephone: +44 (0)1442 431300 ● Facsimile: +44 (0) 1494 775356 ● Email: sales@vislink.com ● Website: www.vislink.com
Company Registered in England & Wales no. 10523708 ● VAT registration no. GB 260 012 169
Registered Office: Waterside House, Earls Colne Business Park, Colchester, Essex, CO6 2NS, UK

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DVE6100 and is the answer not in the manual?

Questions and answers

Related Manuals for Vislink DVE6100

Summary of Contents for Vislink DVE6100

  • Page 1 Vislink, Waterside House, Earls Colne Business Park, Colchester, Essex, CO6 2NS, UK Telephone: +44 (0)1442 431300 ● Facsimile: +44 (0) 1494 775356 ● Email: sales@vislink.com ● Website: www.vislink.com Company Registered in England & Wales no. 10523708 ● VAT registration no. GB 260 012 169...
  • Page 2 Document Disclaimer The information contained in this manual remains the property of Vislink and may not be used, disclosed or reproduced in any other form whatsoever without the prior written permission of Vislink. Vislink reserves the right to alter the equipment and specification appertaining to the equipment described in this manual without notification.
  • Page 3 Document History Version Date Modification Firmware Version 10/09/2019 First release of document. Issue No: 1 Page: iii Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 4: Table Of Contents

    7. Menu Navigation ....................23 7.1.1. Modulator Menu ....................... 23 7.1.1.1. Setup ..........................23 7.1.1.2. Status ..........................24 7.1.1.3. BUC ..........................24 Issue No: 1 Page: iv Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...
  • Page 5 Rear Panel Overview ....................17 Figure 8-1 Supported Modulator Modes .................. 33 Figure 8-2 DVBS Supported Modulations ................34 Figure 8-3 DVBS2 Supported Modulations ................34 Issue No: 1 Page: v Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...
  • Page 6 This page is intentionally unused. Issue No: 1 Page: vi Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 7: General Information

    Environmental directive. 1.3. Environmental CAUTION: Protect the unit from dripping or splashing water/fluids. When used outdoors, protect the unit using a rain cover. Issue No: 1 Page: 7 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 8: Health & Safety

    2. Do not operate any RF transmitter or power amplifiers with any covers removed and do not allow anyone else to do so. Issue No: 1 Page: 8 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 9: Introduction

    DVE6100 provides a 50% reduction in leased satellite bandwidth compared to MPEG-4 and DVB-S2, reducing satellite OPEX. As a multi-format encoder, the DVE6100 provides the ability to encode video of all resolutions from SD to 4K (including High Dynamic Range). The multi-channel capability of the unit allows it to encode up to four HD-video services in HEVC, providing a flexible, channel-dense solution.
  • Page 10 Template Operators Manual Introduction This page is intentionally unused. Issue No: 1 Page: 10 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 11: Specifications

    75R, to ISO/IEC 13818-2 188bytes constant rate. 18V +/-1V @ 1A max. DC on L-band Precision 10MHz Reference on L- -3dBm min. band Issue No: 1 Page: 11 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 12: Remote Control / Monitoring / Hpa Control

    Used to pass data using the SMPTE 2038 standard. Invisidot data or user defined for Ancillary User Data other types of ANC data e.g. VITC Issue No: 1 Page: 12 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...
  • Page 13 -30dB relative to Main output L-Band Monitor Stability ±2x10-8 per day @constant temperature 10MHz Ref Mixed into Main 0dBm ±3dB output Phase noise = IESS309 Issue No: 1 Page: 13 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 14: Ip Video (Future Option)

    4 ≤ D ≤20 In RTP only. NOTE: The DVE6100 Exciter can stream or receive a stream to the above specification converting to or from ASI. NOTE: The unit can carry IP “data” in one direction for addition of data to the internal video.

  • Page 15: Front Panel Overview

    STATUS key – Pressing this key brings the user directly to the ALARMS menu screen. HPA A (B) key – Future use. Issue No: 1 Page: 15 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 16: Leds

    FTD / STBY / Tx in filament time delay going into transmit when warmed up. NOTE: FTD is not valid for SSPAs. Issue No: 1 Page: 16 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 17: Rear Panel

    The format is in RS232 using the pins defined below. 15W PIN# Signal Description Data Rx RS232 MPEG data input to DVE Data Tx Not used Issue No: 1 Page: 17 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 18: Hpa Control

    DVE6100 Exciter. The relay default is factory configured for an open circuit indicating a fail. To reverse this configuration use the internal status link on the control PCB. The relay contacts open if the DVE6100 Exciter loses power or has a major alarm. 15W PIN#...

  • Page 19: Rf1 Output

    “service” of the exciter. The internal service (encoder) may be turned off from the REMUX menu option. This allows you to use the DVE6100 Exciter as a ‘modulator’, but has a multiplexer overhead. For true modulator only mode, purchase a “modulator” licence. This license reduces the overhead.

  • Page 20: Ethernet/Usb Ports

    PORT number. The external IP source should have its destination address set to that of the Ethernet PHY of the receiving DVE6100 Exciter; this is set on the IP Ethernet menu. IP IN takes the de-encapsulated ASI and multiplexes with the internal encoder(s) to form a multiservice stream.

  • Page 21: Operation Guide

    CAUTION: Allow at least 30 seconds after changing a parameter before powering the unit down. Not waiting could result losing in your changes. Issue No: 1 Page: 21 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...
  • Page 22 Template Operators Manual Operation Guide This page is intentionally unused. Issue No: 1 Page: 22 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 23: Menu Navigation

    Combination of internal encoder and external ASI. See Section 7.1.5 about multiplexing function. NOTE: All other RF parameters are set from this menu. Issue No: 1 Page: 23 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 24: Status

    7.1.1.3. Parameter Function LO (local Oscillator) The output from the DVE6100 is always L-Band between 950MHz and 2150MHz. The front panel display can show the final system output frequency of the BUC LO system instead, taking into account the local oscillator frequency of the succeeding SHF block up-converter.

  • Page 25: Video

    The Video menu allows you to enable and disable a channel or use an override. Parameter Function Channel active or not. Enabled Override video input with internally generated bars. Bars Issue No: 1 Page: 25 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...
  • Page 26 SDI 3 3.75 SDI 4 3.75 Total=30Mbs Weighting Enabled Bitrate Mb/s SDI 1 17.14 SDI 2 8.57 SDI 3 SDI 4 4.28 Issue No: 1 Page: 26 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 27: Sdi 1-4

    PID clashes. The external ASI can be burst or byte mode and should be set from this menu. 7.1.6. USER DATA (future option) Issue No: 1 Page: 27 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 28: Hpa Control (Future Option)

    Template Operators Manual Menu Navigation 7.1.7. HPA CONTROL (future option) To be confirmed. 7.1.8. Unit Setup Use this menu to setup the general parameters of the DVE6100. Sub menus are:  Presets  Control  Defaults  Licenses  Time & Date 7.1.8.1.

  • Page 29: Support

    NOTE: These are internal device temperatures and will always be greater than the ambient temperature of the unit. 7.1.9.3. Contact Use the Contact menu to view contact information for various Vislink sites around the world. Use this if you require any support. Issue No: 1 Page: 29 Ref: DVE6-ASUM-70xx Copyright ©...
  • Page 30 Template Operators Manual Menu Navigation This page is intentionally unused. Issue No: 1 Page: 30 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 31: Licenses & Upgrades

    Firmware can be found using the support menus, see Section 7.1.9. 8.2. Upgrades To upgrade unit firmware, refer to the latest firmware release note. Firmware update information is available from the Vislink FTP site, via the Vislink website: https://www.vislink.com Issue No: 1...
  • Page 32 Template Operators Manual Licenses & Upgrades This page is intentionally unused. Issue No: 1 Page: 32 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 33: Figure 8-1 Supported Modulator Modes

          77/90      9/10     Figure 8-1 Supported Modulator Modes Issue No: 1 Page: 33 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

  • Page 34: Figure 8-2 Dvbs Supported Modulations

                9/10     Figure 8-3 DVBS2 Supported Modulations Issue No: 1 Page: 34 Ref: DVE6-ASUM-70xx Copyright © 2019 IMT and Vislink are Vislink Technologies Inc. companies...

Table of Contents