Chapter 4 : Aspire Conference Bridge PCB Web Manager
Update Firmware
The Update Firmware page allows the installer to update the 16CNFU PCB with new Þrmware via the web browser.
Firmware Update:
1. The installer must store the firmware on their local PC.
2. After the file is selected, the installer may click Update to start the transfer.
3.
The 16CNFU PCB transfers the file to the PCB and verifies that the checksum information is
correct.
4.
Upon successful checksum verification, the 16CNFU loads the new firmware.
5.
After the firmware load is completed, the PCB automatically resets.
Aspire Conference Bridge Manual
A successful Þrmware upgrade reverts all system conÞguration to default settings. Make
note of the card conÞguration prior to performing a Þrmware upgrade.
A successful Þrmware upgrade reverts all system conÞguration to default settings. Make
note of the card conÞguration prior to performing a Þrmware upgrade.
The Þrmware upgrade process may take up to Þve minutes.
The Conference Bridge Þrmware uses the following Þle name:
upgradePkg-1.1.0-a.tar.gz, and must be stored on the local PC.
Do not remove or reset the PCB during the upgrade process.
Using the Web Manager
◆ 43