Sony DVP-NS300 Operating Instructions Manual page 21

This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound If the stereo amplifier (receiver) has audio input jacks L and R only, use @
If the
amplifier (receiver) has a digital input jack,
use
a
When connecting to an MD deck or a DAT
deck, use m In this case, you can also connect the player directly to the MD deck or DAT
deck without using your stereo amplifier (receiver)
n
Recommended surround sound effects for the Q) connection only
-TVS STANDARD (page 43)
. ..C
Q In connection e,
you can use the supplied audio/video cord instead of using a separate audio cord
';cs'To tealize better surround sound effects, make sme that yout listening position is in between your speakers
Yyy
If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the m connection
CDIDVD player
Stereo audio cord
Optical digital cord
Remove jack cap
before connecting
to coaxial or optical digital input
F4 1 St;; amplifier (r:r)
A: Signal flow
continued -
21