Table of Contents
Advertisement
http://smh-tech.com.cn http://algocraft.com.cn sales@smh-tech.com.cn +86-15250087885
LAN
IP address:
Netmask:
Default Gateway:
Connect WriteNow! to your LAN through the ethernet cable. If you are using a router, make
sure that the configuration settings match.
WriteNow! could also be connected directly to your PC. In this case or if you want to
configure your LAN manually, you must set a static IP:
On windows system, go
Set the properly IP, subnet mask and the default gateway:
After the first connection, you can change all the LAN parameters through the WriteNow!
terminal (see System Commands on page 34). The new configuration will be enabled after
the programmer reboot.
192.168.1.10
255.255.255.0
192.168.1.1
WriteNow! User's Manual
20
- Quick Links:
- Overview
- Connectors Overview
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WriteNow! Series and is the answer not in the manual?
Questions and answers
How to update/load programer with new license
To update the Algocraft WriteNow! Series programmer with a new license, follow these steps:
1. Obtain the new license file (.wnl) when purchasing a new programming driver.
2. Copy the license file to the `\sys` folder of the WriteNow! system.
3. Ensure the driver file (.wnd) is placed in the `\drivers` folder.
4. The updated license file enables the use of all purchased drivers on the specific WriteNow! unit.
For more details, refer to the WriteNow! File System documentation.
This answer is automatically generated