Panasonic Vossloh-Schwabe Light Controller IP/DALI 2CH Quick Start Manual

Quick Start Guide Light Controller IP/DALI
Mechanical Installation
All instructions contained in the separate installation manual must
be observed with regard to mechanical installation and electrical
connection of the Light Controller IP/DALI.
Network-based Commissioning
OPTION 1: VS LIGHTBOX DHCP
„
First Steps
The LightBox DHCP is already prepared for the
operating and configuration requirements of a
NOTE
Light Controller network system.
LightBox DHCP (Ref. No.: 186513)
Standalone solution
The LightBox DHCP satisfy all system requirements. All
necessary services are pre-configured. The in the pack-
age included Wifi-Extender is pre-configured as a DHCP
server to enable direct connection to and use with the
Light Controller.
N
Only one DHCP server may be installed in
the network at any time.
IMPORTANT
Vossloh-Schwabe Deutschland GmbH · Hohe Steinert 8 · 58509 Lüdenscheid · Germany · Tel. +49 (0) 23 51/10 10 · Fax +49 (0) 23 51/10 12 17 · www.vossloh-schwabe.com
Operating Option 1: Server-based Installation
(LightBox DHCP)
• Connect a monitor via HDMI.
• We recommend setting the pre-installed Mozilla Firefox browser
as your default browser.
• Open browser and enter the following URL: http://127.0.0.1
Operating Option 2: Client-based Installation
(e.g. tablet or PC)
For LightBox DHCP (Ref. No.: 186513)
• Wireless commissioning (e.g. tablet) by using the Wifi-Hotspot
of the Wifi-Extender
For more information, use the "Quick Start Guide
LightBox DHCP"
NOTE
Number of Light Controllers
Max. number of Light Controller per LightBox DHCP: 5
A Member of the Panasonic Group
1